Melola Discovery

← Melola Discovery

Open access Jurnal SINTA 1

The Effect of Plasma-Treated Boron Nitride on Partial Discharge Characteristics of LDPE

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 7 No. 2 (2017)

DOI
10.11591/ijece.v7i2.pp568-575
ISSN
2088-8708, 2088-8708
Published
2017-04-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-nc/4.0

Abstract

Power supply reliability is a key factor in a country economic stability. It is contributed by the reliable power distributor via transmission lines, overhead or underground cables. However, the power cables and accessories are always exposed to pre-breakdown phenomena known as partial discharges (PD) which commonly occur in microvoids, defects or protrusions inside the insulation. To improve the performance of the cable insulation against PD, nanofillers are added into the insulating materials. However, to achieve superior performance of PD resistance, the nanofillers must be homogeneously dispersed into the polymer matrices with tightly bonded interfacial zones. Therefore, this could be achieved by employing method of surface functionalization by using cold atmospheric plasma to strengthen the filler/polymer interfaces. In view of foregoing, this study investigated the effects of surface treated boron nitride (BN) nanoparticles in Low Density Polyethylene (LDPE) on the PD characteristics by following CIGRE Method II at 7 kVrms applied voltage. The phase resolved PD characteristics were performed. The results revealed that by treating the nanofillers with cold plasma, the PD resistance of LDPE were highly achieved compared with the untreated BN nanofillers.

Collaboration network of the authors

28 authors · 106 co-authorship links · 56 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • University of Technology Malaysia
  • Universitas Sumatera Utara
  • Jakarta Global University
  • Jenderal Soedirman University
  • Bandung Institute of Technology
  • Universiti Sains Malaysia
  • IPB University
  • Other organisations
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Mohd Hafizi AhmadUniversity of Technology Malaysia8
Noor Azlinda AhmadUniversity of Technology Malaysia2
Nor Asiah MuhamadUniversiti Sains Malaysia2
Zuraimy AdzisUniversity of Technology Malaysia2
M. S. Mohd Fua’adUniversity of Technology Malaysia2
Rosyid Ridlo Al-HakimIPB University1
Muhammad Haikal SatriaUniversity of Technology Malaysia1
Agung PangestuJakarta Global University1
Hexa Apriliana HidayahJenderal Soedirman University1
Glagah E. SetyowisnuBandung Institute of Technology1
Prihantini PrihantiniBandung Institute of Technology1
Antonius Darma SetiawanJakarta Global University1
Esa Rinjani Cantika PutriJenderal Soedirman University1
Noor ‘Aliaa AwangAffiliation unknown1
Faris Akmal SuhainiUniversity of Technology Malaysia1
Siti Sufiah Abd WahidUniversiti Teknologi MARA1
Mohd Fikri Hilmi Mohd TaibUniversity of Technology Malaysia1
Mohd Hafiez Izzwan SaadUniversiti Malaysia Sarawak1
Yulianta SiregarUniversitas Sumatera Utara1
Maulaya MuhammadUniversitas Sumatera Utara1
Naemah MubarakahUniversitas Sumatera Utara1
Soeharwinto SoeharwintoUniversitas Sumatera Utara1
Riswan DinziUniversitas Sumatera Utara1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Okt 2026, last seen 27 Okt 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>The Effect of Plasma-Treated Boron Nitride on Partial Discharge Characteristics of LDPE</dc:title><dc:creator>Awang, N.A</dc:creator><dc:creator>Ahmad, M.H</dc:creator><dc:creator>Arief, Y.Z.</dc:creator><dc:creator>Zakaria, I.H.</dc:creator><dc:creator>Ahmad, N.A.</dc:creator><dc:description>&lt;jats:p&gt;Power supply reliability is a key factor in a country economic stability. It is contributed by the reliable power distributor via transmission lines, overhead or underground cables. However, the power cables and accessories are always exposed to pre-breakdown phenomena known as partial discharges (PD) which commonly occur in microvoids, defects or protrusions inside the insulation. To improve the performance of the cable insulation against PD, nanofillers are added into the insulating materials. However, to achieve superior performance of PD resistance, the nanofillers must be homogeneously dispersed into the polymer matrices with tightly bonded interfacial zones. Therefore, this could be achieved by employing method of surface functionalization by using cold atmospheric plasma to strengthen the filler/polymer interfaces. In view of foregoing, this study investigated the effects of surface treated boron nitride (BN) nanoparticles in Low Density Polyethylene (LDPE) on the PD characteristics by following CIGRE Method II at 7 kVrms applied voltage. The phase resolved PD characteristics were performed. The results revealed that by treating the nanofillers with cold plasma, the PD resistance of LDPE were highly achieved compared with the untreated BN nanofillers.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2017-04-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v7i2.pp568-575</dc:identifier><dc:identifier>10.11591/ijece.v7i2.pp568-575</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 7 No 2 (2017); 568</dc:source><dc:source>2088-8708</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/6401/6269</dc:relation><dc:rights>http://creativecommons.org/licenses/by-nc/4.0</dc:rights></oai_dc:dc>