Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Variable Body Biasing (VBB) based VLSI Design Approach to Reduce Static Power

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 7 No. 6 (2017)

DOI
10.11591/ijece.v7i6.pp3010-3019
ISSN
2088-8708, 2088-8708
Terbit
2017-12-01
Penerbit
Institute of Advanced Engineering and Science
Lisensi
creativecommons.org/licenses/by-nc/4.0

Abstrak

The static power consumption is an important parameter concern in IC design due to t for a higher integration numbers of transistor to achieve greater performance in a single chip. Leakage current is the main issues for static power dissipation in standby mode as the size of transistor been scale. Therefore, the subthreshold leakage current rises due to threshold voltage scaling and gate leakage current increases due to scale down of oxide thickness. In this paper, a Variable Body Biasing (VBB) technique was applied to reduce static power consumption in VLSI design. The VBB technique used a DC bias at body terminal to control the threshold voltage efficiently. The Synopsys Custom Designer EDA tools in 90nm MOSFET technology was used to design a 1-bit full adder with VBB technique in full custom methodology. The simulation of 1-bit full adder was carried out with operation voltage supply was compared in conventional technique and VBB technique. The results achieved the reduction in term of peak power, and average power, in static CMOS 1-bit full adder compared with conventional bias and VBB technique.

Jaringan kolaborasi para penulis

9 penulis · 16 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Tun Hussein Onn University of Malaysia
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Ariffuddin JoretTun Hussein Onn University of Malaysia1
Norshidah KatiranTun Hussein Onn University of Malaysia1
Nurulhuda IsmailTun Hussein Onn University of Malaysia1
Eddy Irwan Shah SaadonTun Hussein Onn University of Malaysia1
Ardhi WijayantoTun Hussein Onn University of Malaysia1
Salman AhmedTun Hussein Onn University of Malaysia1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Data ini berasal dari Crossref (yang disetorkan penerbit), karena endpoint OAI-PMH milik jurnal tidak dapat di-harvest.

Sumber metadata: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, pertama di-harvest 27 Okt 2026, terakhir terlihat 15 Nov 2026.
Metadata sebagai oai_dc, dikonversi dari Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Variable Body Biasing (VBB) based VLSI Design Approach to Reduce Static Power</dc:title><dc:creator>Wei Kai, Woo</dc:creator><dc:creator>Ahmad, Nabihah binti</dc:creator><dc:creator>Bin Jabbar, Mohamad Hairol</dc:creator><dc:description>&lt;jats:p&gt;The static power consumption is an important parameter concern in IC design due to t for a higher integration numbers of transistor to achieve greater performance in a single chip. Leakage current is the main issues for static power dissipation in standby mode as the size of transistor been scale. Therefore, the subthreshold leakage current rises due to threshold voltage scaling and gate leakage current increases due to scale down of oxide thickness. In this paper, a Variable Body Biasing (VBB) technique was applied to reduce static power consumption in VLSI design. The VBB technique used a DC bias at body terminal to control the threshold voltage efficiently. The Synopsys Custom Designer EDA tools in 90nm MOSFET technology was used to design a 1-bit full adder with VBB technique in full custom methodology. The simulation of 1-bit full adder was carried out with operation voltage   supply was compared in conventional technique and VBB technique. The results achieved the reduction in term of peak power,   and average power,   in static CMOS 1-bit full adder compared with conventional bias and VBB technique.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2017-12-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v7i6.pp3010-3019</dc:identifier><dc:identifier>10.11591/ijece.v7i6.pp3010-3019</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 7 No 6 (2017); 3010</dc:source><dc:source>2088-8708</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/8669/7265</dc:relation><dc:rights>http://creativecommons.org/licenses/by-nc/4.0</dc:rights></oai_dc:dc>