Melola Discovery

← Melola Discovery

Open access Jurnal SINTA 1

A New Dual Band Printed Metamaterial Antenna for RFID Reader Applications

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 7 No. 6 (2017)

DOI
10.11591/ijece.v7i6.pp3507-3514
ISSN
2088-8708, 2088-8708
Published
2017-12-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-nc/4.0

Abstract

In this paper, we present a new dual band metamaterial printed antenna for radio frequency identification applications. The proposed antenna consists of two L-shaped slot in the radiating element for dual band operation and a complementary split ring resonator etched from the ground plane for size miniaturization. This antenna is designed and optimized by CST microwave studio on FR-4 substrate with thickness of 1.6 mm, dielectric constant of 4.4 and tangent loss of 0.025. A microstrip line with characteristic impedance of 50 ohms is used to feed this antenna. A prototype of the proposed antenna is fabricated to validate the simulation results. The measured and simulated results are in good agreement.

Collaboration network of the authors

40 authors · 145 co-authorship links · 79 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Université Hassan 1er
  • Abdelmalek Essaâdi University
  • Universidad de Cantabria
  • École Supérieure d'Électronique de l'Ouest
  • Institut National des Postes et Télécommunications
  • Université Moulay Ismail de Meknes
  • Université du Québec
  • Other organisations
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Larbi El AbdellaouiUniversité Hassan 1er32
Abdelali TajmouatiUniversité Hassan 1er26
Mohamed RibateUniversité Hassan 1er12
Ahmed LakhssassiUniversité du Québec9
Abdelwahed TribakInstitut National des Postes et Télécommunications7
Fouad AytounaAbdelmalek Essaâdi University7
Amine RachakhUniversité Hassan 1er6
Badr NasiriUniversité Hassan 1er5
Mohamed AghoutaneAbdelmalek Essaâdi University4
Naima Amar TouhamiAbdelmalek Essaâdi University4
Hamid BennisUniversité Moulay Ismail de Meknes4
Ahmed GhalouaUniversité Hassan 1er3
Otman ChakkorAbdelmalek Essaâdi University3
Ibtissame MoumaneUniversité Hassan 1er3
Ayoub MalkiUniversité Hassan 1er3
Abdellah TaybiUniversité Hassan 1er3
Elmahjouby SghirUniversité Hassan 1er3
Aziz OukairaUniversité du Québec en Outaouais2
Rachid DakirUniversité Hassan 1er2
Ahmed MouhsenUniversité Hassan 1er2
A. M. SanchezUniversidad de Cantabria2
Issam ZahraouiUniversité Hassan 1er2
Mohammed Chaouki AbounaimaSidi Mohamed Ben Abdellah University2
Saida ElajoumiUniversité Hassan 1er2
Am. SanchezUniversidad de Cantabria2
Elhassane AbdelmounimUniversité Hassan 1er2
Ahmed El HamraouiUniversité Hassan 1er2
EL Hassane AbdelmounimAffiliation unknown2
Mohammed BendaouedUniversité Hassan 1er1
Jaouad TerhzazCentre Régional des Métiers de l'Éducation et de la Formation Casablanca-Settat1
Mohamed IhamjiUniversité Hassan 1er1
Mostafa HefnawiRoyal Military College of Canada1
Akram El HamdouniUniversité Hassan 1er1
Jamal ZbitoUniversité Hassan 1er1
Khalifa EchchakhaouiUniversité Hassan 1er1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Okt 2026, last seen 27 Okt 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>A New Dual Band Printed Metamaterial Antenna for RFID Reader Applications</dc:title><dc:creator>Ennajih, Abdelhadi</dc:creator><dc:creator>Zbitou, Jamal</dc:creator><dc:creator>Latrach, Mohamed</dc:creator><dc:creator>Errkik, Ahmed</dc:creator><dc:creator>Mandry, Rachid</dc:creator><dc:description>&lt;jats:p&gt;&amp;lt;span lang="EN-US"&amp;gt;In this paper, we present a new dual band metamaterial printed antenna for radio frequency identification applications. The proposed antenna consists of two L-shaped slot in the radiating element for dual band operation and a complementary split ring resonator etched from the ground plane for size miniaturization. This antenna is designed and optimized by CST microwave studio on FR-4 substrate with thickness of 1.6 mm, dielectric constant of 4.4 and tangent loss of 0.025. A microstrip line with characteristic impedance of 50 ohms is used to feed this antenna. A prototype of the proposed antenna is fabricated to validate the simulation results. The measured and simulated results are in good agreement. &amp;lt;/span&amp;gt;&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2017-12-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v7i6.pp3507-3514</dc:identifier><dc:identifier>10.11591/ijece.v7i6.pp3507-3514</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 7 No 6 (2017); 3507</dc:source><dc:source>2088-8708</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/8719/7380</dc:relation><dc:rights>http://creativecommons.org/licenses/by-nc/4.0</dc:rights></oai_dc:dc>