Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Modeling and Structure Optimization of Tapped Transformer

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 7 No. 1 (2017)

DOI
10.11591/ijece.v7i1.pp41-49
ISSN
2088-8708, 2088-8708
Terbit
2017-02-01
Penerbit
Institute of Advanced Engineering and Science
Lisensi
creativecommons.org/licenses/by-nc/4.0

Abstrak

In this paper, a simplified circuit model of the tapped transformer structure has been presented to extract the Geometric and technology parameters and offer better physical understanding. Moreover, the structure of planar transformer has been optimized by using changing the width and space of the primary coil, so as to enlarge the quality factor Q and high coupling coefficient K. To verify the results obtained by using these models, we have compared them with the results obtained by employing the MATLAB simulator. Very good agreement has been recorded for the effective primary inductance value, whereas the effective primary quality factor value has shown a somewhat larger deviation than the inductance.

Jaringan kolaborasi para penulis

27 penulis · 67 tautan kepenulisan bersama · 20 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Hassiba Benbouali University of Chlef
  • Ahmed Zabana University - Relizane
  • Zagazig University
  • Ontario Tech University
  • University of Bahrain
  • University of Bouira
  • University Mohamed Boudiaf of M'sila
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
M’hamed HelaimiHassiba Benbouali University of Chlef4
Bachir BelmadaniHassiba Benbouali University of Chlef3
Maamar SouaihiaHassiba Benbouali University of Chlef2
Mohamed RegadHassiba Benbouali University of Chlef2
Ahmed M. OthmanZagazig University2
Hossam A. GabbarOntario Tech University2
Noureddine MansourUniversity of Bahrain2
Abdelkader BelboulaHassiba Benbouali University of Chlef2
Azzedine KhatiHassiba Benbouali University of Chlef1
Abdelkader KansabHassiba Benbouali University of Chlef1
Houari KhouidmiHassiba Benbouali University of Chlef1
Fayçal MehediAfiliasi tidak diketahui1
Hacene MellahUniversity of Bouira1
Moussa BakdiHassiba Benbouali University of Chlef1
Asma ToualbiaHassiba Benbouali University of Chlef1
Ismail BouyakoubHassiba Benbouali University of Chlef1
Madjid Meriem BenzianeHassiba Benbouali University of Chlef1
Alla Eddine Toubal MaamarHassiba Benbouali University of Chlef1
Abdelatif GadoumHassiba Benbouali University of Chlef1
Tounsi KamelUniversity Mohamed Boudiaf of M'sila1
Djilali BenyoucefHassiba Benbouali University of Chlef1
Zinelaabidine BoudjemaHassiba Benbouali University of Chlef1
Ahmed Wahid BelarbiAfiliasi tidak diketahui1
Mohamed Ali MoussaHassiba Benbouali University of Chlef1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Data ini berasal dari Crossref (yang disetorkan penerbit), karena endpoint OAI-PMH milik jurnal tidak dapat di-harvest.

Sumber metadata: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, pertama di-harvest 27 Okt 2026, terakhir terlihat 15 Nov 2026.
Metadata sebagai oai_dc, dikonversi dari Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Modeling and Structure Optimization of Tapped Transformer</dc:title><dc:creator>Namoune, Abdelhadi</dc:creator><dc:creator>Hamid, Azzedine</dc:creator><dc:creator>Taleb, Rachid</dc:creator><dc:description>&lt;jats:p&gt;In this paper, a simplified circuit model of the tapped transformer structure has been presented to extract the Geometric and technology parameters and offer better physical understanding. Moreover, the structure of planar transformer has been optimized by using changing the width and space of the primary coil, so as to enlarge the quality factor &amp;lt;em&amp;gt;Q&amp;lt;/em&amp;gt; and high coupling coefficient &amp;lt;em&amp;gt;K&amp;lt;/em&amp;gt;. To verify the results obtained by using these models, we have compared them with the results obtained by employing the MATLAB simulator. Very good agreement has been recorded for the effective primary inductance value, whereas the effective primary quality factor value has shown a somewhat larger deviation than the inductance.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2017-02-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v7i1.pp41-49</dc:identifier><dc:identifier>10.11591/ijece.v7i1.pp41-49</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 7 No 1 (2017); 41</dc:source><dc:source>2088-8708</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/6251/5968</dc:relation><dc:rights>http://creativecommons.org/licenses/by-nc/4.0</dc:rights></oai_dc:dc>