In this work, a tunable ferrofluid-based polydimethylsiloxane (PDMS) microchannel inductor with high quality factor and high tuning range is proposed. For this project, PDMS is used to create a microchannel with a width and height of 0.53 mm and 0.2 mm respectively. The microchannel is then used to cover the whole design of a solenoid inductor. A solenoid inductor is designed using wire bonding technique where lines of copper and bond wires are used to form a solenoid winding on top of silicon substrate. A light hydrocarbon based ferrofluid EMG 901 660 mT with high permeability of 5.4 is used. The ferrofluid-based liquid is injected into the channel to enhance the performance of a quality factor. A 3D full-wave electromagnetic fields tool, ANSYS HFSS is used in this work to simulate the solenoid inductor. The results obtained in this work gives a quality factor of more than 10 at a frequency range of 300 MHz to 3.3 GHz (Ultra High Frequency range). The highest quality factor is 37 which occurs at a frequency of 1.5 GHz, provides a high tuning range of 112%.
Jaringan kolaborasi para penulis
4 penulis ·
6 tautan kepenulisan bersama
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
Universiti Sains Malaysia
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulis
Organisasi
Artikel bersama
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.