Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

The Effect of Different Dielectric Materials in Designing High-Performance Metal-Insulator-Metal (MIM) Capacitors

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 7 No. 3 (2017)

DOI
10.11591/ijece.v7i3.pp1554-1561
ISSN
2088-8708, 2088-8708
Terbit
2017-06-01
Penerbit
Institute of Advanced Engineering and Science
Lisensi
creativecommons.org/licenses/by-nc/4.0

Abstrak

A Metal-Insulator-Metal (MIM) capacitor with high capacitance, high breakdown voltage, and low leakage current is aspired so that the device can be applied in many electronic applications. The most significant factors that affect the MIM capacitor’s performance is the design and the dielectric materials used. In this study, MIM capacitors are simulated using different dielectric materials and different number of dielectric layers from two layers up to seven layers. The effect of the different dielectric constants ( k ) to the performance of the MIM capacitors is also studied, whereas this work investigates the effect of using low- k and high- k dielectric materials. The dielectric materials used in this study with high- k are Al 2 O 3 and HfO 2, while the low- k dielectric materials are SiO 2 and Si 3 N 4. The results demonstrate that the dielectric materials with high- k produce the highest capacitance. Results also show that metal-Al 2 O 3 interfaces increase the performance of the MIM capacitors. By increasing the number of dielectric layers to seven stacks, the capacitance and breakdown voltage reach its highest value at 0.39 nF and 240 V, respectively.

Jaringan kolaborasi para penulis

13 penulis · 46 tautan kepenulisan bersama · 22 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universiti Malaysia Perlis
  • IPB University
  • University of Indonesia
  • Bandung Institute of Technology
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Irzaman IrzamanIPB University1
Z. JamalAfiliasi tidak diketahui1
Hanedi DarmasetiawanIPB University1
Hendradi HardhienataIPB University1
Muhammad HikamUniversity of Indonesia1
Pepen ArifinBandung Institute of Technology1
S.N. JusohUniversiti Malaysia Perlis1
M. A. IdrisUniversiti Malaysia Perlis1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Data ini berasal dari Crossref (yang disetorkan penerbit), karena endpoint OAI-PMH milik jurnal tidak dapat di-harvest.

Sumber metadata: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, pertama di-harvest 27 Okt 2026, terakhir terlihat 15 Nov 2026.
Metadata sebagai oai_dc, dikonversi dari Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>The Effect of Different Dielectric Materials in Designing High-Performance Metal-Insulator-Metal (MIM) Capacitors</dc:title><dc:creator>Zulkifeli, M. A.</dc:creator><dc:creator>Sabki, S. N.</dc:creator><dc:creator>Taking, S.</dc:creator><dc:creator>Azmi, N. A.</dc:creator><dc:creator>Jamuar, S. S.</dc:creator><dc:description>&lt;jats:p&gt;&amp;lt;p&amp;gt;A Metal-Insulator-Metal (MIM) capacitor with high capacitance, high breakdown voltage, and low leakage current is aspired so that the device can be applied in many electronic applications. The most significant factors that affect the MIM capacitor’s performance is the design and the dielectric materials used. In this study, MIM capacitors are simulated using different dielectric materials and different number of dielectric layers from two layers up to seven layers.  The effect of the different dielectric constants (&amp;lt;em&amp;gt;k&amp;lt;/em&amp;gt;) to the performance of the MIM capacitors is also studied, whereas this work investigates the effect of using low-&amp;lt;em&amp;gt;k&amp;lt;/em&amp;gt; and high-&amp;lt;em&amp;gt;k&amp;lt;/em&amp;gt; dielectric materials. The dielectric materials used in this study with high-&amp;lt;em&amp;gt;k&amp;lt;/em&amp;gt; are Al&amp;lt;sub&amp;gt;2&amp;lt;/sub&amp;gt;O&amp;lt;sub&amp;gt;3&amp;lt;/sub&amp;gt; and HfO&amp;lt;sub&amp;gt;2&amp;lt;/sub&amp;gt;, while the low-&amp;lt;em&amp;gt;k&amp;lt;/em&amp;gt; dielectric materials are SiO&amp;lt;sub&amp;gt;2&amp;lt;/sub&amp;gt; and Si&amp;lt;sub&amp;gt;3&amp;lt;/sub&amp;gt;N&amp;lt;sub&amp;gt;4&amp;lt;/sub&amp;gt;. The results demonstrate that the dielectric materials with high-&amp;lt;em&amp;gt;k&amp;lt;/em&amp;gt; produce the highest capacitance. Results also show that metal-Al&amp;lt;sub&amp;gt;2&amp;lt;/sub&amp;gt;O&amp;lt;sub&amp;gt;3&amp;lt;/sub&amp;gt; interfaces increase the performance of the MIM capacitors. By increasing the number of dielectric layers to seven stacks, the capacitance and breakdown voltage reach its highest value at 0.39 nF and 240 V, respectively.&amp;lt;/p&amp;gt;&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2017-06-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v7i3.pp1554-1561</dc:identifier><dc:identifier>10.11591/ijece.v7i3.pp1554-1561</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 7 No 3 (2017); 1554</dc:source><dc:source>2088-8708</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/7522/6573</dc:relation><dc:rights>http://creativecommons.org/licenses/by-nc/4.0</dc:rights></oai_dc:dc>