Melola Discovery

← Melola Discovery

Jurnal

KUALITAS PAPAN KOMPOSIT YANG TERBUAT DARI LIMBAH KAYU SENGON DAN KARTON DAUR ULANG

PERENNIAL · Vol. 2 No. 1 (2006) · pp. 6–11

DOI
10.24259/perennial.v2i1.147
ISSN
2685-6859, 1412-7784
Published
2006-01-01
Publisher
Forestry Faculty of Hasanuddin University
Language
en

Abstract

The use of recycled carton as an alternative material for the layer of composite board may increase the board strength properties. The objective of this research was to find out the influence of face and back layer types on the quality of produced boards. Materials used in this study were wafer made from sengon wood (Paraserianthes falcataria L. Nielsen), water based polymer isocyanate adhesive, and several kinds of cartons such as duplex carton, recycled carton, and waste of corrugated board. The composite board was produced with the target density of 0.65 g/cm3 and the resin solid content of 6% based on oven dry weight of particle, face and back layers. The results are as follows: 1) Utilization of carton layers improved the dimensional stability and bending strength of board; 2) Composite board with recycled carton layer fullfilled the Japanese Industrial Standard (JIS) A-5908-1994 for wafer board type in terms of density, water content, and modulus of rupture (MOR) in lengthwise and widhtwise of board but, did not fullfill that for veneered particled board type; 3) The presence of those layer material types decreased internal bond of the board. Keywords: composite board, face and back layer types, recyled carton

Collaboration network of the authors

19 authors · 51 co-authorship links

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Andi Detti YuniantiAffiliation unknown3
Astuti ArifAffiliation unknown3
AgussalimAffiliation unknown2
Ira TaskirawatiAffiliation unknown2
BakriAffiliation unknown2
Musrizal MuinAffiliation unknown2
Sitti NuraeniAffiliation unknown2
Dina SetyawatiAffiliation unknown2
Naresworo NugrohoAffiliation unknown2
Djamal SanusiAffiliation unknown1
Asmi Citra MalinaAffiliation unknown1
Rohny Setiawan MaailAffiliation unknown1
Dede HermawanAffiliation unknown1
Ifa Zanty WahyuniAffiliation unknown1
Zahrial CotoAffiliation unknown1
Sucahyo SadiyoAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://journal.unhas.ac.id/index.php/perennial/oai, first harvested 5 Nov 2026, last seen 5 Nov 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en"> KUALITAS PAPAN KOMPOSIT YANG TERBUAT DARI LIMBAH KAYU SENGON DAN KARTON DAUR ULANG </dc:title>
	<dc:creator xml:lang="en">Suhasman, .</dc:creator>
	<dc:creator xml:lang="en">Massijaya, Muh. Yusram</dc:creator>
	<dc:creator xml:lang="en">Hadi, Yusuf Sudo</dc:creator>
	<dc:description xml:lang="en"> The use of recycled carton as an alternative material for the layer of composite board may increase the board strength properties. The objective of this research was to find out the influence of face and back layer types on the quality of produced boards. Materials used in this study were wafer made from sengon wood (Paraserianthes falcataria L. Nielsen), water based polymer isocyanate adhesive, and several kinds of cartons such as duplex carton, recycled carton, and waste of corrugated board. The composite board was produced with the target density of 0.65 g/cm3 and the resin solid content of 6% based on oven dry weight of particle, face and back layers. The results are as follows : 1) Utilization of carton layers improved the dimensional stability and bending strength of board; 2) Composite board with recycled carton layer fullfilled the Japanese Industrial Standard (JIS) A-5908-1994 for wafer board type in terms of density, water content, and modulus of rupture (MOR) in lengthwise and widhtwise of board but, did not fullfill that for veneered particled board type; 3) The presence of those layer material types decreased internal bond of the board.

Keywords : composite board, face and back layer types, recyled carton
			</dc:description>
	<dc:publisher xml:lang="en">Forestry Faculty of Hasanuddin University</dc:publisher>
	<dc:date>2006-01-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unhas.ac.id/index.php/perennial/article/view/147</dc:identifier>
	<dc:identifier>10.24259/perennial.v2i1.147</dc:identifier>
	<dc:source xml:lang="en">PERENNIAL; Vol. 2 No. 1 (2006); 6-11</dc:source>
	<dc:source xml:lang="id">PERENNIAL; Vol 2 No 1 (2006); 6-11</dc:source>
	<dc:source>2685-6859</dc:source>
	<dc:source>1412-7784</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unhas.ac.id/index.php/perennial/article/view/147/538</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2016 PERENNIAL</dc:rights>
</oai_dc:dc>