Melola Discovery

← Melola Discovery

Jurnal

SIFAT FISIK DAN MEKANIK KOMPOSIT KAYU SEMEN-SERBUK GERGAJI

PERENNIAL · Vol. 2 No. 1 (2006) · pp. 38–41

DOI
10.24259/perennial.v2i1.153
ISSN
2685-6859, 1412-7784
Published
2006-01-01
Publisher
Forestry Faculty of Hasanuddin University
Language
en

Abstract

This research aims to find out the effect of cement-saw dust ratio levels on the physical and mechanical properties of produced composites. The physical properties (density, water content, water absorption after the immersion of one hour and 24 hours, and thickness swelling after the immersion of one hour and 24 hours) and mechanical properties (MOE and MOR) were observed according to ISO standards. The results showed that the use of the cement to sawdust ratio of 3: 1 in producing wood composite with the target density of 1200 kg/m3 resulted in the lowest water absorption and the highest MOE and MOR. The swelling value and MOR of the produced boards were not acceptable, but their water content, water absorption, and MOE parameters were acceptable according to ISO 8335 1997. Key Words: Physical and mechanical properties, cement wood composite, sawdust

Collaboration network of the authors

16 authors · 53 co-authorship links

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Tadulako University
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Musrizal MuinAffiliation unknown4
. SuhasmanAffiliation unknown3
Andi Detti YuniantiAffiliation unknown2
AgussalimAffiliation unknown2
Ira TaskirawatiAffiliation unknown2
Yuli Asmi RahmanTadulako University1
Tri WahyuningsihAffiliation unknown1
Muhammad BakriAffiliation unknown1
KhairinrahmatAffiliation unknown1
Andi Arham AdamAffiliation unknown1
Rizaldi MaadjiAffiliation unknown1
Chairunnisa AR. LamasitudjuAffiliation unknown1
BaharuddinAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://journal.unhas.ac.id/index.php/perennial/oai, first harvested 5 Nov 2026, last seen 5 Nov 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en"> SIFAT FISIK DAN MEKANIK KOMPOSIT KAYU SEMEN-SERBUK GERGAJI </dc:title>
	<dc:creator xml:lang="en">Bakri, .</dc:creator>
	<dc:creator xml:lang="en">Gunawan, Endra</dc:creator>
	<dc:creator xml:lang="en">Sanusi, Djamal</dc:creator>
	<dc:description xml:lang="en"> This research aims to find out the effect of cement-saw dust ratio levels on the physical and mechanical properties of produced composites. The physical properties (density, water content, water absorption after the immersion of one hour and 24 hours, and thickness swelling after the immersion of one hour and 24 hours) and mechanical properties (MOE and MOR) were observed according to ISO standards. The results showed that the use of the cement to sawdust ratio of 3 : 1 in producing wood composite with the target density of 1200 kg/m3 resulted in the lowest water absorption and the highest MOE and MOR. The swelling value and MOR of the produced boards were not acceptable, but their water content, water absorption, and MOE parameters were acceptable according to ISO 8335 1997.

Key Words : Physical and mechanical properties, cement wood composite, sawdust
			</dc:description>
	<dc:publisher xml:lang="en">Forestry Faculty of Hasanuddin University</dc:publisher>
	<dc:date>2006-01-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unhas.ac.id/index.php/perennial/article/view/153</dc:identifier>
	<dc:identifier>10.24259/perennial.v2i1.153</dc:identifier>
	<dc:source xml:lang="en">PERENNIAL; Vol. 2 No. 1 (2006); 38-41</dc:source>
	<dc:source xml:lang="id">PERENNIAL; Vol 2 No 1 (2006); 38-41</dc:source>
	<dc:source>2685-6859</dc:source>
	<dc:source>1412-7784</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unhas.ac.id/index.php/perennial/article/view/153/pdf</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2016 PERENNIAL</dc:rights>
</oai_dc:dc>