Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

A Novel Displacement-amplifying Compliant Mechanism Implemented on a Modified Capacitive Accelerometer

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 7 No. 4 (2017)

DOI
10.11591/ijece.v7i4.pp1858-1866
ISSN
2088-8708, 2088-8708
Terbit
2017-08-01
Penerbit
Institute of Advanced Engineering and Science
Lisensi
creativecommons.org/licenses/by-nc/4.0

Abstrak

The micro-accelerometers are devices used to measure acceleration. They are implemented in applications such as tilt-control in spacecraft, inertial navigation, oil exploration, etc. These applications require high operating frequency and displacement sensitivity. But getting both high parameter values at the same time is difficult, because there are physical relationships, for each one, where the mass is involved. When the mass is reduced, the operating frequency is high, but the displacement sensitivity decreases and vice versa. The implementation of Displacement-amplifying Compliant Mechanism (DaCM) supports to this dependence decreases. In this paper the displacement sensitivity and operation frequency of a Conventional Capacitive Accelerometer are shown (CCA). A Capacitive Accelerometer with Extended Beams (CAEB) is also presented, which improves displacement sensitivity compared with CCA, and finally the implementation of DACM´s in the aforementioned devices was also carried out. All analyzed cases were developed considering the in-plane mode. The Matlab code used to calculate displacement sensitivity and operating frequency relationship is given in Appendix A.

Jaringan kolaborasi para penulis

9 penulis · 29 tautan kepenulisan bersama · 7 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universidad Autónoma del Estado de Morelos
  • National Institute of Astrophysics, Optics and Electronics
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Svetlana V. KoshevayaUniversidad Autónoma del Estado de Morelos13
Ramon CabelloUniversidad Autónoma del Estado de Morelos8
Alejandra Ocampo-DiazUniversidad Autónoma del Estado de Morelos4

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Data ini berasal dari Crossref (yang disetorkan penerbit), karena endpoint OAI-PMH milik jurnal tidak dapat di-harvest.

Sumber metadata: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, pertama di-harvest 27 Okt 2026, terakhir terlihat 15 Nov 2026.
Metadata sebagai oai_dc, dikonversi dari Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>A Novel Displacement-amplifying Compliant Mechanism Implemented on a Modified Capacitive Accelerometer</dc:title><dc:creator>Cabello-Ruiz, Ramon</dc:creator><dc:creator>Tecpoyotl-Torres, Margarita</dc:creator><dc:creator>Torres-Jacome, Alfonso</dc:creator><dc:creator>Grimalsky, Volodymyr</dc:creator><dc:creator>Vera-Dimas, Jose Gerardo</dc:creator><dc:creator>Vargas-Chable, Pedro</dc:creator><dc:description>&lt;jats:p&gt;The micro-accelerometers are devices used to measure acceleration. They are implemented in applications such as tilt-control in spacecraft, inertial navigation, oil exploration, etc. These applications require high operating frequency and displacement sensitivity. But getting both high parameter values at the same time is difficult, because there are physical relationships, for each one, where the mass is involved. When the mass is reduced, the operating frequency is high, but the displacement sensitivity decreases and vice versa. The implementation of Displacement-amplifying Compliant Mechanism (DaCM) supports to this dependence decreases. In this paper the displacement sensitivity and operation frequency of a Conventional Capacitive Accelerometer are shown (CCA). A Capacitive Accelerometer with Extended Beams (CAEB) is also presented, which improves displacement sensitivity compared with CCA, and finally the implementation of DACM´s in the aforementioned devices was also carried out. All analyzed cases were developed considering the in-plane mode. The Matlab code used to calculate displacement sensitivity and operating frequency relationship is given in Appendix A.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2017-08-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v7i4.pp1858-1866</dc:identifier><dc:identifier>10.11591/ijece.v7i4.pp1858-1866</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 7 No 4 (2017); 1858</dc:source><dc:source>2088-8708</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/7727/7209</dc:relation><dc:rights>http://creativecommons.org/licenses/by-nc/4.0</dc:rights></oai_dc:dc>