Melola Discovery

← Melola Discovery

Jurnal Tanpa peringkat SINTA

KETAHANAN API KAYU SENGON (Paraserianthes falcataria (L.) Nielsen) YANG DIAWETKAN DENGAN BAHAN PENGAWET BORAKS: Fire Resistance Of Sengon (Paraserianthes Falcataria (L.) Nielsen) Preserved With Borax

PERENNIAL · Vol. 17 No. 1 (2021) · hlm. 19–25

DOI
10.24259/perennial.v17i1.13650
ISSN
2685-6859, 1412-7784
Terbit
2021-05-17
Penerbit
Forestry Faculty of Hasanuddin University
Bahasa
id

Abstrak

Inggris

Woods are easy to ignite by fire. Increasing fire resistance with fire retardants is needed to increase safety and reduce losses due to fire. This research aimed to determine the fire resistance of Sengon wood treated with preservation of borax with a concentration of 5%, 10%, and 15% by cold immersion for five days. The fire resistance test used the ASTM E69-02 standard, while the statistical analysis (ANOVA) of the test data used a Completely Randomized Design at the 95% confidence level and the LSD test (Least Significant Difference test). The results showed of the physical properties of Sengon wood, the average value of air-dry moisture content was 14.08%, air-dry density was 0.33g/cm3, and oven-dry density was 0.30g/cm3. In contrast, the LSD test showed a significant difference between the controls to the all-borax preservation treatments, but between 5%, 10%, and 15% borax treatments were not significantly different. The best fire resistance parameter values ​​were found in the 15% borax treatment, with the retention of 38.04 kg/m3, burning intensity 12.58%, combustion time 437.5 seconds, and effectiveness of 4.76. The fire resistance effectiveness value of all equipment cannot meet the ASTM E69-02 standard

Bahasa Indonesia

Wood as building raw materials still very needed, but flammability is one of the detrimental properties. Increasing fire resistance with Borax as fire retardants are needed to increase safety, reduce material and non-material losses due to the impact of fire. The aim of this study was to determine the properties of cold immersion of Sengon in Borax solution for 5 days with different concentrations as a fire retardant. Fire resistance testing used the ASTM E69-02 standard. ANOVA analysis with Completely Randomized Design at the 95% confidence level and LSD (Least Significant Difference) Test. The results showed that immersion Sengon with Borax solution with different concentrations had a significant effect. The average value of the air dry moisture content of the Sengon was 14.08%, the air dry density was 0.33g/cm3, the oven dry density was 0.30g/cm3, the highest Borax preservative retention was at a concentration of 15% of 38.04 kg/m3, the smallest burnst Intensity is 12.58% at 15% concentration, the lowest maximum combustion temperature is 210.1ᵒC at 10% concentration, and the smallest combustion time is 437.5 seconds at 15% concentration. In general, the cold immersion preservation treatment of 15% Borax solution shows the best fire resistance properties, although it still does not meet ASTM E69-02 standards.

Kata kunci

Jaringan kolaborasi para penulis

2 penulis · 1 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Mulawarman University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Irvin DayadiMulawarman University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unhas.ac.id/index.php/perennial/oai, pertama di-harvest 5 Nov 2026, terakhir terlihat 15 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">KETAHANAN API KAYU SENGON (Paraserianthes falcataria (L.) Nielsen) YANG DIAWETKAN DENGAN BAHAN PENGAWET BORAKS: Fire Resistance Of Sengon (Paraserianthes Falcataria (L.) Nielsen) Preserved With Borax</dc:title>
	<dc:title xml:lang="id">KETAHANAN API KAYU SENGON (Paraserianthes falcataria (L.) Nielsen)  YANG DIAWETKAN DENGAN BAHAN PENGAWET BORAKS: Fire Resistance Of Sengon (Paraserianthes Falcataria (L.) Nielsen) Preserved With Borax</dc:title>
	<dc:creator xml:lang="en">DAYADI, IRVIN</dc:creator>
	<dc:creator xml:lang="id">DAYADI, IRVIN</dc:creator>
	<dc:subject xml:lang="id">Borax, Concentration, Cold immersion, Fire Resistance, Retention</dc:subject>
	<dc:subject xml:lang="en">Borax</dc:subject>
	<dc:subject xml:lang="en">Concentration</dc:subject>
	<dc:subject xml:lang="en">Fire Resistance</dc:subject>
	<dc:subject xml:lang="en">Retention</dc:subject>
	<dc:subject xml:lang="en">Sengon</dc:subject>
	<dc:description xml:lang="en">Woods are easy to ignite by fire. Increasing fire resistance with fire retardants is needed to increase safety and reduce losses due to fire. This research aimed to determine the fire resistance of Sengon wood treated with preservation of borax with a concentration of 5%, 10%, and 15% by cold immersion for five days. The fire resistance test used the ASTM E69-02 standard, while the statistical analysis (ANOVA) of the test data used a Completely Randomized Design at the 95% confidence level and the LSD test (Least Significant Difference test). The results showed of the physical properties of Sengon wood, the average value of air-dry moisture content was 14.08%, air-dry density was 0.33g/cm3, and oven-dry density was 0.30g/cm3.  In contrast, the LSD test showed a significant difference between the controls to the all-borax preservation treatments, but between 5%, 10%, and 15% borax treatments were not significantly different. The best fire resistance parameter values ​​were found in the 15% borax treatment, with the retention of 38.04 kg/m3, burning intensity 12.58%, combustion time 437.5 seconds, and effectiveness of 4.76. The fire resistance effectiveness value of all equipment cannot meet the ASTM E69-02 standard</dc:description>
	<dc:description xml:lang="id">Wood as building raw materials still very needed, but flammability is one of the detrimental properties. Increasing fire resistance with Borax as fire retardants are needed to increase safety, reduce material and non-material losses due to the impact of fire. The aim of this study was to determine the properties of cold immersion of Sengon in Borax solution for 5 days with different concentrations as a fire retardant. Fire resistance testing used the ASTM E69-02 standard. ANOVA analysis with Completely Randomized Design at the 95% confidence level and LSD (Least Significant Difference) Test. The results showed that immersion Sengon with Borax solution with different concentrations had a significant effect. The average value of the air dry moisture content of the Sengon was 14.08%, the air dry density was 0.33g/cm3, the oven dry density was 0.30g/cm3, the highest Borax preservative retention was at a concentration of 15% of 38.04 kg/m3, the smallest burnst Intensity is 12.58% at 15% concentration, the lowest maximum combustion temperature is 210.1ᵒC at 10% concentration, and the smallest combustion time is 437.5 seconds at 15% concentration. In general, the cold immersion preservation treatment of 15% Borax solution shows the best fire resistance properties, although it still does not meet ASTM E69-02 standards.</dc:description>
	<dc:publisher xml:lang="en">Forestry Faculty of Hasanuddin University</dc:publisher>
	<dc:date>2021-05-17</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unhas.ac.id/index.php/perennial/article/view/13650</dc:identifier>
	<dc:identifier>10.24259/perennial.v17i1.13650</dc:identifier>
	<dc:source xml:lang="en">PERENNIAL; Vol. 17 No. 1 (2021): Vol. 17 No. 1, April 2021; 19-25</dc:source>
	<dc:source xml:lang="id">PERENNIAL; Vol 17 No 1 (2021): Vol. 17 No. 1, April 2021; 19-25</dc:source>
	<dc:source>2685-6859</dc:source>
	<dc:source>1412-7784</dc:source>
	<dc:language>id</dc:language>
	<dc:relation>https://journal.unhas.ac.id/index.php/perennial/article/view/13650/6882</dc:relation>
</oai_dc:dc>