The paper proposes a design strategy to retain the true nature of the output in the event of occurrence of stuck at faults at the interconnect levels of digital circuits. The procedure endeavours to design a combinational architecture which includes attributes to identify stuck at faults present in the intermediate lines and involves a healing mechanism to redress the same. The simulated fault injection procedure introduces both single as well as multiple stuck-at faults at the interconnect levels of a two level combinational circuit in accordance with the directives of a control signal. The inherent heal facility attached to the formulation enables to reach out the fault free output even in the presence of faults. The Modelsim based simulation results obtained for the Circuit Under Test [CUT] implemented using a Read Only Memory [ROM], proclaim the ability of the system to survive itself from the influence of faults. The comparison made with the traditional Triple Modular Redundancy [TMR] exhibits the superiority of the scheme in terms of fault coverage and area overhead.
Jaringan kolaborasi para penulis
2 penulis ·
1 tautan kepenulisan bersama
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
Annamalai University
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulis
Organisasi
Artikel bersama
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.