Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Design, Realization and Measurements of Compact Dual-band CPW-fed Patch Antenna for 2.45/5.80 GHz RFID Applications

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 8 No. 1 (2018)

DOI
10.11591/ijece.v8i1.pp172-178
ISSN
2088-8708, 2088-8708
Terbit
2018-02-01
Penerbit
Institute of Advanced Engineering and Science
Lisensi
creativecommons.org/licenses/by-nc/4.0

Abstrak

In this paper, a Coplanar Wave Guide (CPW)-Fed microstrip octagonal patch antenna for RFID Applications is proposed. The studied structure is suitable for 2.45/5.80 GHz applications. The octagonal shape is obtained by making triangular cuts in the four angles of the rectangular microstrip patch antenna; in addition the using of CPW-Fed allows obtaining UWB characteristics in the higher band. The miniaturization in the antenna size for lower band is achieved by introducing an inverted E slot in the radiating element. The proposed antenna is designed on a single and a small substrate board of dimensions 29.5×29.5×1.6 mm3. Moreover the miniaturized antenna has a good impedance matching and an enhanced gain. The simulation analysis was performed using the CADFEKO software, a Method of Moment (MoM) based solver, and a prototype of this antenna was fabricated, good agreement with the simulation providing validation of the design procedure. The measurements are done with ANRITSU MS2026C Vectorial Network Analyzer.

Jaringan kolaborasi para penulis

6 penulis · 9 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • University of Hassan II Casablanca
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Youssef MejdoubUniversity of Hassan II Casablanca1
Abdelkebir ElamriAfiliasi tidak diketahui1
Abdel-Ali LaabadliUniversity of Hassan II Casablanca1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Data ini berasal dari Crossref (yang disetorkan penerbit), karena endpoint OAI-PMH milik jurnal tidak dapat di-harvest.

Sumber metadata: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, pertama di-harvest 27 Okt 2026, terakhir terlihat 15 Nov 2026.
Metadata sebagai oai_dc, dikonversi dari Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Design, Realization and Measurements of Compact Dual-band CPW-fed Patch Antenna for 2.45/5.80 GHz RFID Applications</dc:title><dc:creator>Tarbouch, Mohamed</dc:creator><dc:creator>El Amri, Abdelkebir</dc:creator><dc:creator>Terchoune, Hanae</dc:creator><dc:description>&lt;jats:p&gt;In this paper, a Coplanar Wave Guide (CPW)-Fed microstrip octagonal patch antenna for RFID Applications is proposed. The studied structure is suitable for 2.45/5.80 GHz applications. The octagonal shape is obtained by making triangular cuts in the four angles of the rectangular microstrip patch antenna; in addition the using of CPW-Fed allows obtaining UWB characteristics in the higher band. The miniaturization in the antenna size for lower band is achieved by introducing an inverted E slot in the radiating element. The proposed antenna is designed on a single and a small substrate board of dimensions 29.5×29.5×1.6 mm3. Moreover the miniaturized antenna has a good impedance matching and an enhanced gain. The simulation analysis was performed using the CADFEKO software, a Method of Moment (MoM) based solver, and a prototype of this antenna was fabricated, good agreement with the simulation providing validation of the design procedure. The measurements are done with ANRITSU MS2026C Vectorial Network Analyzer.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2018-02-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v8i1.pp172-178</dc:identifier><dc:identifier>10.11591/ijece.v8i1.pp172-178</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 8 No 1 (2018); 172</dc:source><dc:source>2088-8708</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/10111/8103</dc:relation><dc:rights>http://creativecommons.org/licenses/by-nc/4.0</dc:rights></oai_dc:dc>