Melola Discovery

← Melola Discovery

Jurnal Tanpa peringkat SINTA

DESIGN OF DRYER FOR SMALL FARMERS BASED ON THE STUDY OF ERGONOMICS THERMAL ENGINEERING APPLICATION

Jurnal Pendidikan Teknik Mesin · Vol. 25 No. 1 (2025) · hlm. 8–14

DOI
10.15294/jptm.v25i1.21325
ISSN
2503-1759, 2503-1759
Terbit
2025-07-03
Penerbit
Universitas Negeri Semarang
Bahasa
eng

Abstrak

Ergonomics thermal engineering combines the principles of thermal engineering and ergonomics to design systems and products that optimize energy and resources, improve worker thermal comfort, and reduce thermal stress and fatigue. Small farmers still dry post-harvest food under direct sunlight in open areas. This process produces less than optimal drying thermal temperatures, which impacts long drying times, and dried food is susceptible to dust and animal faeces exposure. In addition, exposure to sunlight on workers causes additional workloads that affect fatigue. This can be overcome by utilizing solar collectors through dryer design based on anthropometric data of workers as users. The dryer was designed through an ergonomics thermal engineering study. Based on anthropometric data and percentile calculations, dimensions were obtained for the dryer design, such as the bottom shelf with a height from the floor of 66.88 cm based on the knuckle, the top shelf height of 123.8 cm from the floor based on standing eye height, and the height of the drying room air chimney from the floor is 177.59 cm based on the height of the upper reach. To avoid new problems with the dryer application, a table was designed as a workaid with a height of 84.31 cm based on the height of the standing elbow. Applying the principles of ergonomics thermal engineering can create systems and products that are more comfortable, safe, and efficient for workers.

Kata kunci

Jaringan kolaborasi para penulis

7 penulis · 8 tautan kepenulisan bersama · 1 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • University of Mataram
  • Politeknik Negeri Bali
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
I Gede SantosaPoliteknik Negeri Bali2
I Made SuartikaUniversity of Mataram2
Anak Agung Alit TriadiUniversity of Mataram1
Wisnu KawirianUniversity of Mataram1
Gilang Ade PutraUniversity of Mataram1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unnes.ac.id/journals/JPTM/oai, pertama di-harvest 5 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">DESIGN OF DRYER FOR SMALL FARMERS BASED ON THE STUDY OF ERGONOMICS THERMAL ENGINEERING APPLICATION</dc:title>
	<dc:creator xml:lang="en">Bawa Susana, I Gede</dc:creator>
	<dc:creator xml:lang="en">Perdana Putra, I Ketut</dc:creator>
	<dc:subject xml:lang="en">Design</dc:subject>
	<dc:subject xml:lang="en">dryer</dc:subject>
	<dc:subject xml:lang="en">anthropometry</dc:subject>
	<dc:subject xml:lang="en">ergonomics thermal engineering</dc:subject>
	<dc:description xml:lang="en">Ergonomics thermal engineering combines the principles of thermal engineering and ergonomics to design systems and products that optimize energy and resources, improve worker thermal comfort, and reduce thermal stress and fatigue. Small farmers still dry post-harvest food under direct sunlight in open areas. This process produces less than optimal drying thermal temperatures, which impacts long drying times, and dried food is susceptible to dust and animal faeces exposure. In addition, exposure to sunlight on workers causes additional workloads that affect fatigue. This can be overcome by utilizing solar collectors through dryer design based on anthropometric data of workers as users. The dryer was designed through an ergonomics thermal engineering study. Based on anthropometric data and percentile calculations, dimensions were obtained for the dryer design, such as the bottom shelf with a height from the floor of 66.88 cm based on the knuckle, the top shelf height of 123.8 cm from the floor based on standing eye height, and the height of the drying room air chimney from the floor is 177.59 cm based on the height of the upper reach. To avoid new problems with the dryer application, a table was designed as a workaid with a height of 84.31 cm based on the height of the standing elbow. Applying the principles of ergonomics thermal engineering can create systems and products that are more comfortable, safe, and efficient for workers.    </dc:description>
	<dc:publisher xml:lang="en">Universitas Negeri Semarang</dc:publisher>
	<dc:date>2025-07-03</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unnes.ac.id/journals/JPTM/article/view/21325</dc:identifier>
	<dc:identifier>10.15294/jptm.v25i1.21325</dc:identifier>
	<dc:source xml:lang="en">Jurnal Pendidikan Teknik Mesin; Vol. 25 No. 1 (2025): June 2025; 8 - 14</dc:source>
	<dc:source>2503-1759</dc:source>
	<dc:source>2503-1759</dc:source>
	<dc:source>10.15294/jptm.v25i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.unnes.ac.id/journals/JPTM/article/view/21325/4792</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2025 Jurnal Pendidikan Teknik Mesin</dc:rights>
</oai_dc:dc>