THE DETERMINATION OF THE OUTSIDE MOLD DIMENSION FOR OPTIMIZATION OF THE CLAMPING FORCE OF THE PLASTIC INJECTION MACHINE

Basuki, Puji; Setyaningrum, Ratih; Laroybafih, Muhammad Bagus; -, Suwantri

doi:10.15294/jptm.v25i02.41282

Jurnal

THE DETERMINATION OF THE OUTSIDE MOLD DIMENSION FOR OPTIMIZATION OF THE CLAMPING FORCE OF THE PLASTIC INJECTION MACHINE

Jurnal Pendidikan Teknik Mesin · Vol. 25 No. 02 (2025) · hlm. 54–60

DOI: 10.15294/jptm.v25i02.41282
ISSN: 2503-1759, 2503-1759
Terbit: 2025-12-31
Penerbit: Universitas Negeri Semarang
Bahasa: eng

Abstrak

Injection molding is a popular method that is used to make plastic products due to high productivity, efficiency, and manufacturability. This paper presents the effect of the mold outside dimension on a suitable injection molding machine. It is to capacity in relation to production cost. This research is important as a guide for determining the outer dimensions of the mold to suit the machine being used. The smallest size isn't necessarily the most efficient, as there are minimum dimensions that can be used. The research included calculations for product weight, cycle time, tie bar distance, and minimum mold height. The compatibility between the injection machine used and the mold's outer dimensions is crucial. In this research, the mold height needs to be increased from the previously designed smallest dimensions.

Kata kunci

Jaringan kolaborasi para penulis

7 penulis · 12 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

Afiliasi tidak diketahui

Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel

Tampilkan sebagai tabel

Rekan penulis	Organisasi	Artikel bersama
Indah Puspitasari	Afiliasi tidak diketahui	1
fajar paundra	Afiliasi tidak diketahui	1
Kuncoro Diharjo	Afiliasi tidak diketahui	1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unnes.ac.id/journals/JPTM/oai, pertama di-harvest 5 Nov 2026, terakhir terlihat 8 Nov 2026.

Metadata asli (oai_dc)

<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">THE DETERMINATION OF THE OUTSIDE MOLD DIMENSION FOR OPTIMIZATION OF THE CLAMPING FORCE OF THE PLASTIC INJECTION MACHINE</dc:title>
	<dc:creator xml:lang="en">Basuki, Puji</dc:creator>
	<dc:creator xml:lang="en">Setyaningrum, Ratih </dc:creator>
	<dc:creator xml:lang="en">Laroybafih, Muhammad Bagus </dc:creator>
	<dc:creator xml:lang="en">-, Suwantri</dc:creator>
	<dc:subject xml:lang="en">clamping force, injection, machine, mold, plastic</dc:subject>
	<dc:description xml:lang="en">Injection molding is a popular method that is used to make plastic products due to high productivity, efficiency, and manufacturability. This paper presents the effect of the mold outside dimension on a suitable injection molding machine. It is to capacity in relation to production cost. This research is important as a guide for determining the outer dimensions of the mold to suit the machine being used. The smallest size isn't necessarily the most efficient, as there are minimum dimensions that can be used. The research included calculations for product weight, cycle time, tie bar distance, and minimum mold height. The compatibility between the injection machine used and the mold's outer dimensions is crucial. In this research, the mold height needs to be increased from the previously designed smallest dimensions.</dc:description>
	<dc:publisher xml:lang="en">Universitas Negeri Semarang</dc:publisher>
	<dc:date>2025-12-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unnes.ac.id/journals/JPTM/article/view/41282</dc:identifier>
	<dc:identifier>10.15294/jptm.v25i02.41282</dc:identifier>
	<dc:source xml:lang="en">Jurnal Pendidikan Teknik Mesin; Vol. 25 No. 02 (2025): December 2025 ; 54-60</dc:source>
	<dc:source>2503-1759</dc:source>
	<dc:source>2503-1759</dc:source>
	<dc:source>10.15294/jptm.v25i02</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.unnes.ac.id/journals/JPTM/article/view/41282/9101</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2026 Jurnal Pendidikan Teknik Mesin</dc:rights>
</oai_dc:dc>