Microstrip patch antennas are increasingly gaining popularity for usage in portable wireless system applications due to their light weight, low profile structure, low cost of production and robust nature. The patch is generally made of a conducting material such as copper or gold and can take any possible shapes, but rectangular shapes are generally used to simplify analysis and performance prediction. Microstrip patch antenna radiates due to the fringing fields between the patch edge and ground plane. In this work, a frequency reconfigurable antenna with a BAR63-02V Positive-Intrinsic-Negative (PIN) diode is designed, simulated and fabricated. The antenna operates at 2.686GHz for Long-Term Evolution (LTE2500) and 5.164GHz for Wireless Local Area Network (WLAN) applications. In the OFF state, the antenna operates at 5.302GHz, which is also suitable for WLAN application. The proposed antenna is fabricated on a FR-4 substrate with a relative dielectric constant, εr of 4.5, thickness, h of 1.6mm and loss tangent, tan δ of 0.019. The fabrication process is carried out at the Advanced Printed Circuit Board (PCB) Design Laboratory in UTHM.
Collaboration network of the authors
21 authors ·
76 co-authorship links
· 22 across different organisations
Hover or tap a name to highlight its co-authors. Double-click to open the author's page.
Tun Hussein Onn University of Malaysia
University of Technology Malaysia
Affiliation unknown
Different organisations
Same organisation
Affiliation unknown
Thicker line = more joint articles · bigger circle = more articles
Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.