Melola Discovery

← Melola Discovery

Open access Jurnal SINTA 1

Multi-Objective based Optimal Energy and Reactive Power Dispatch in Deregulated Electricity Markets

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 8 No. 5 (2018)

DOI
10.11591/ijece.v8i5.pp3427-3435
ISSN
2088-8708, 2088-8708
Published
2018-10-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-nc/4.0

Abstract

This paper presents a day-ahead (DA) multi-objective based joint energy and reactive power dispatch in the deregulated electricity markets. The traditional social welfare in the centralized electricity markets comprises of customers benefit function and the cost function of active power generation. In this paper, the traditional social welfare is modified to incorporate the cost of both active and reactive power generation. Here, the voltage dependent load modeling is used. This paper brings out the unsuitability of traditional single objective functions, e.g., social welfare maximization (SWM), loss minimization (LM) due to the reduction of amount of load served. Therefore, a multi-objective based optimization is required. This paper proposes four objectives, i.e., SWM, load served maximization (LSM), LM and voltage stability enhancement index (VSEI); and these objectives can be combined as per the operating condition. The simulation studies are performed on IEEE 30 bus test system by considering the both traditional constant load modeling and the proposed voltage dependent load modeling.

Collaboration network of the authors

6 authors · 7 co-authorship links · 2 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Woosong University
  • Veer Surendra Sai University of Technology
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Seong-Cheol KimWoosong University2
S. NarasimhaAffiliation unknown1
Chan-Mook JungWoosong University1
Papia RayVeer Surendra Sai University of Technology1
Pankaj SharmaWoosong University1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Okt 2026, last seen 1 Nov 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Multi-Objective based Optimal Energy and Reactive Power Dispatch in Deregulated Electricity Markets</dc:title><dc:creator>Salkuti, Surender Reddy</dc:creator><dc:description>&lt;jats:p&gt;This paper presents a day-ahead (DA) multi-objective based joint energy and reactive power dispatch in the deregulated electricity markets. The traditional social welfare in the centralized electricity markets comprises of customers benefit function and the cost function of active power generation. In this paper, the traditional social welfare is modified to incorporate the cost of both active and reactive power generation. Here, the voltage dependent load modeling is used. This paper brings out the unsuitability of traditional single objective functions, e.g., social welfare maximization (SWM), loss minimization (LM) due to the reduction of amount of load served. Therefore, a multi-objective based optimization is required. This paper proposes four objectives, i.e., SWM, load served maximization (LSM), LM and voltage stability enhancement index (VSEI); and these objectives can be combined as per the operating condition. The simulation studies are performed on IEEE 30 bus test system by considering the both traditional constant load modeling and the proposed voltage dependent load modeling.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2018-10-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v8i5.pp3427-3435</dc:identifier><dc:identifier>10.11591/ijece.v8i5.pp3427-3435</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 8 No 5 (2018); 3427</dc:source><dc:source>2088-8708</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/9193/9510</dc:relation><dc:rights>http://creativecommons.org/licenses/by-nc/4.0</dc:rights></oai_dc:dc>