This paper describes the design and implementation of fuzzy gain scheduling PID control for position of the AR.Drone. This control scheme uses 3 PID controllers as the main controller of the AR.Drone, in this case to control pitch, roll and throttle. The process of tuning parameters for each PID is done automatically by scheduling determined by Takagi-Sugeno-Kang (TSK) fuzzy logic model. This paper uses five function sets of PID parameters that will be evaluated by fuzzy logic in order to tune PID controllers. Error position (x,y,z), as inputs of controller, enters the PID Signal block yielding the ouputs in term of error, integral error and differential error. These signal become the inputs of the fuzzy scheduler to yield outputs pitch, roll and throttle to the AR.drone. The control scheme is implemented on the AR.Drone to make it fly to forming a square in the room. The experimental results show that the control scheme can follow the desired points, and process scheduling PID parameters can be shown.
Collaboration network of the authors
3 authors ·
3 co-authorship links
Hover or tap a name to highlight its co-authors. Double-click to open the author's page.
University of Surabaya
Different organisations
Same organisation
Affiliation unknown
Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-author
Organisation
Joint articles
Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.