Melola Discovery

← Melola Discovery

Open access Jurnal SINTA 1

A Novel Nonlinear Control of Boost Converter using CCM Phase Plane

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 8 No. 6 (2018)

DOI
10.11591/ijece.v8i6.pp4282-4291
ISSN
2088-8708, 2088-8708
Published
2018-12-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-nc/4.0

Abstract

Boost converter is one of fundamental DC-DC converters and used to deliver electric power with boosted voltage in many electrical systems. Several control strategies have been applied to control a boost converter delivering a constant output voltage. Generally, boost converter works in two modes; one is called a Continuous Conduction Mode (CCM). Many researches use CCM model in the controller design, but they never ensure that the controller always works in CCM. This paper proposes novel nonlinear controller of boost converter designed using the modification of flow in phase plane. The proposed controller guarantees that the boost converter works only in CCM region. The simulation result confirms that our proposed controller brings the state variables from any initial point to a desired operating point successfully.

Collaboration network of the authors

22 authors · 57 co-authorship links · 5 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • University of Brawijaya
  • University of Miyazaki
  • National Institute of Technology, Nara College
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Takuya HirataUniversity of Miyazaki11
Kazuya YamaguchiNational Institute of Technology, Nara College6
Achmad BasukiUniversity of Brawijaya2
Edita Rosana WidasariUniversity of Brawijaya2
Barlian Henryranu PrasetioUniversity of Brawijaya2
Kazuya YamaguchiAffiliation unknown2
Wijaya KurniawanUniversity of Brawijaya1
Gembong Edhi SetyawanUniversity of Brawijaya1
Khafidzun FadliUniversity of Brawijaya1
Hawwin Purnama AkbarUniversity of Brawijaya1
Ryzaldi Ananda FabianaUniversity of Brawijaya1
Syahrul ChilmiUniversity of Brawijaya1
Dahnial SyauqyUniversity of Brawijaya1
Septiyo Budi PerkasaUniversity of Brawijaya1
Hurriyatul FitriyahUniversity of Brawijaya1
Agung Setia BudiUniversity of Brawijaya1
Rizal MaulanaUniversity of Brawijaya1
Rakhmadhany PrimanandaUniversity of Brawijaya1
Kazuya YamaguchiAffiliation unknown1
Lunde ArdhentaUniversity of Miyazaki1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Okt 2026, last seen 27 Okt 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>A Novel Nonlinear Control of Boost Converter using CCM Phase Plane</dc:title><dc:creator>Setiawan, Eko</dc:creator><dc:creator>Hodaka, Ichijo</dc:creator><dc:description>&lt;jats:p&gt;&amp;lt;p&amp;gt;Boost converter is one of fundamental DC-DC converters and used to deliver electric power with boosted voltage in many electrical systems. Several control strategies have been applied to control a boost converter delivering a constant output voltage. Generally, boost converter works in two modes; one is called a Continuous Conduction Mode (CCM). Many researches use CCM model in the controller design, but they never ensure that the controller always works in CCM. This paper proposes novel nonlinear controller of boost converter designed using the modification of flow in phase plane. The proposed controller guarantees that the boost converter works only in CCM region. The simulation result confirms that our proposed controller brings the state variables from any initial point to a desired operating point successfully.&amp;lt;/p&amp;gt;&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2018-12-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v8i6.pp4282-4291</dc:identifier><dc:identifier>10.11591/ijece.v8i6.pp4282-4291</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 8 No 6 (2018); 4282</dc:source><dc:source>2088-8708</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/10498/11539</dc:relation><dc:rights>http://creativecommons.org/licenses/by-nc/4.0</dc:rights></oai_dc:dc>