Melola Discovery

← Melola Discovery

Open access Jurnal SINTA 1

Simulation of 3-phase matrix converter using space vector modulation

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 9 No. 2 (2019)

DOI
10.11591/ijece.v9i2.pp909-916
ISSN
2088-8708, 2088-8708
Published
2019-04-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-nc/4.0

Abstract

This paper illustrates the simulation of 3-phase matrix converter using Space Vector Modulation (SVM). Variable AC output voltage engendered using matrix converter with bidirectional power switches controlled by appropriate switching pulse. The conventional PWM converter engenders switching common mode voltage across the load system terminals, which cause to common mode current and its leads to bearing failure in load drive. These problems can be rectified using SVM and which minimize the effect on the harmonic fluctuation in AC output voltage and stress on the power switch is reduced using bidirectional switch for proposed 3-phase matrix converter. The simulation results have been presented to validate the proposed system using matlab / simulink.

Collaboration network of the authors

29 authors · 97 co-authorship links · 14 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • SRM Institute of Science and Technology
  • SRM University
  • American International University-Bangladesh
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Krishnasamy VijayakumarSRM Institute of Science and Technology8
S. VidyasagarSRM Institute of Science and Technology7
D. KarthikeyanSRM Institute of Science and Technology6
D. SelvabharathiSRM Institute of Science and Technology5
V. KalyanasundaramSRM Institute of Science and Technology3
A. VeluAffiliation unknown2
V. VenkatachalamSRM Institute of Science and Technology2
R. Mano NarayananSRM Institute of Science and Technology2
D. SaravanakumarSRM Institute of Science and Technology2
S. George FernandezSRM Institute of Science and Technology2
V. KalyanasundhramSRM Institute of Science and Technology2
C. S. BoopathiSRM Institute of Science and Technology2
Priyanka DasSRM Institute of Science and Technology1
Gaurav Kumar SinghSRM Institute of Science and Technology1
Sourav SinhaAmerican International University-Bangladesh1
Arnab NagSRM Institute of Science and Technology1
Th. Ankit SinghSRM Institute of Science and Technology1
Anamika RanjanSRM Institute of Science and Technology1
Jatin P SinghSRM Institute of Science and Technology1
R. SridharSRM Institute of Science and Technology1
Rohit SahasrabuddheSRM Institute of Science and Technology1
Mathur Kartik HiteshkumarSRM Institute of Science and Technology1
Jay Anil PuranikSRM Institute of Science and Technology1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Okt 2026, last seen 27 Okt 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Simulation of 3-phase matrix converter using space vector modulation</dc:title><dc:creator>Selvakumar, K.</dc:creator><dc:creator>Palanisamy, R.</dc:creator><dc:creator>Stalin, Arul Rayappan</dc:creator><dc:creator>Gopi, P.</dc:creator><dc:creator>Ponselvin, P.</dc:creator><dc:creator>Saravanan, K.</dc:creator><dc:description>&lt;jats:p&gt;&amp;lt;p&amp;gt;This paper illustrates the simulation of 3-phase matrix converter using Space Vector Modulation (SVM). Variable AC output voltage engendered using matrix converter with bidirectional power switches controlled by appropriate switching pulse. The conventional PWM converter engenders switching common mode voltage across the load system terminals, which cause to common mode current and its leads to bearing failure in load drive. These problems can be rectified using SVM and which minimize the effect on the harmonic fluctuation in AC output voltage and stress on the power switch is reduced using bidirectional switch for proposed 3-phase matrix converter. The simulation results have been presented to validate the proposed system using matlab / simulink.&amp;lt;/p&amp;gt;&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2019-04-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v9i2.pp909-916</dc:identifier><dc:identifier>10.11591/ijece.v9i2.pp909-916</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 9 No 2 (2019); 909</dc:source><dc:source>2088-8708</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/8405/11592</dc:relation><dc:rights>http://creativecommons.org/licenses/by-nc/4.0</dc:rights></oai_dc:dc>