Melola Discovery

← Melola Discovery

Open access Jurnal SINTA 1

Direct and indirect vector control of a doubly fed induction generator based in a wind energy conversion system

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 9 No. 3 (2019)

DOI
10.11591/ijece.v9i3.pp1531-1540
ISSN
2088-8708, 2088-8708
Published
2019-06-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-nc/4.0

Abstract

In the recent years, the development and the exploitation of renewable energy knew a great evolution. Among these energy resources, the wind power represents an important potential for that the wind system has been the subject of several researches. The purpose of this study is to improve the power extracted from wind energy, taking into consideration the variation of wind speed which causes a problem in energy production. For this purpose, we have controlled the powers whether it is active or reactive delivered by the generator. This paper, presents essentially the modeling and control of doubly- fed induction generator (DFIG), which is connected to a variable speed wind turbine. Firstly, the model of the wind power system with the maximum power point tracking (MPPT) strategy is shown. Then, the modeling of doubly- fed induction generator (DFIG) and its power control is presented. Finnaly, to ensure the attitude of these controls the simulations is presented in the Matlab/Simulink environment.

Collaboration network of the authors

7 authors · 18 co-authorship links · 11 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Mohamed I University
  • Sidi Mohamed Ben Abdellah University
  • Université Moulay Ismail de Meknes
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Elmostafa ZianiAffiliation unknown3

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Okt 2026, last seen 27 Okt 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Direct and indirect vector control of a doubly fed induction generator based in a wind energy conversion system</dc:title><dc:creator>Bouderbala, Manale</dc:creator><dc:creator>Bossoufi, Badre</dc:creator><dc:creator>Lagrioui, Ahmed</dc:creator><dc:creator>Taoussi, Mohammed</dc:creator><dc:creator>Aroussi, Hala Alami</dc:creator><dc:creator>Ihedrane, Yasmine</dc:creator><dc:description>&lt;jats:p&gt;&amp;lt;p&amp;gt;In the recent years, the development and the exploitation of renewable energy knew a great evolution. Among these energy resources, the wind power represents an important potential for that the wind system has been the subject of several researches. The purpose of this study is to improve the power extracted from wind energy, taking into consideration the variation of wind speed which causes a problem in energy production. For this purpose, we have controlled the powers whether it is active or reactive delivered by the generator. This paper, presents essentially the modeling and control of doubly- fed induction generator (DFIG), which is connected to a variable speed wind turbine. Firstly, the model of the wind power system with the maximum power point tracking (MPPT) strategy is shown. Then, the modeling of doubly- fed induction generator (DFIG) and its power control is presented. Finnaly, to ensure the attitude of these controls the simulations is presented in the Matlab/Simulink environment.&amp;lt;/p&amp;gt;&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2019-06-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v9i3.pp1531-1540</dc:identifier><dc:identifier>10.11591/ijece.v9i3.pp1531-1540</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 9 No 3 (2019); 1531</dc:source><dc:source>2088-8708</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/13675/12879</dc:relation><dc:rights>http://creativecommons.org/licenses/by-nc/4.0</dc:rights></oai_dc:dc>