Melola Discovery

← Melola Discovery

Open access Jurnal SINTA 1

Single feed circularly polarized crescent-cut and extended corner square microstrip antennas for wireless biotelemetry

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 9 No. 3 (2019)

DOI
10.11591/ijece.v9i3.pp1902-1909
ISSN
2088-8708, 2088-8708
Published
2019-06-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-nc/4.0

Abstract

In this paper, the development of two novel circularly polarized microstrip antennas is thoroughly explained. These antennas are fed by coaxial feeding technique. One of the primary objectives of the proposed work is to tune the antennas to work in ISM band. This frequency band refers to the internationally recognized radio frequency bandwidth which is to be used explicitly for Industrial, Scientific, and Medical applications. Therefore, these antennas would be suitable to use in the field of wireless biotelemetry. Two new antenna design techniques have been introduced to produce circular polarization, and details of these schemes are described. The proposed microstrip antennas are designed and simulated on Advanced Design System (ADS) software. The return loss of the proposed crescent-cut antenna is -19.3 dB at the operating frequency. The extended corner antenna has the return loss of -29.3 dB at the tuned frequency. The simulation results are also presented and discussed.

Collaboration network of the authors

30 authors · 77 co-authorship links · 24 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Chittagong University of Engineering & Technology
  • Saga University
  • Military Institute of Science and Technology
  • City University of Hong Kong
  • Bangladesh University of Engineering and Technology
  • Khulna University of Engineering and Technology
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Muhammad Asad RahmanChittagong University of Engineering & Technology5
Abu Hena MurshedChittagong University of Engineering & Technology4
Debprosad DasChittagong University of Engineering & Technology4
Md. Farhad HossainChittagong University of Engineering & Technology4
Eisuke NishiyamaSaga University3
Ichihiko ToyodaSaga University3
Md. Mamunoor IslamChittagong University of Engineering & Technology2
Aditta ChowdhuryChittagong University of Engineering & Technology2
Diba DasChittagong University of Engineering & Technology2
Sampad GhoshChittagong University of Engineering & Technology2
Nur MohammadChittagong University of Engineering & Technology1
Md. Asiful IslamBangladesh University of Engineering and Technology1
Tarequl KarimChittagong University of Engineering & Technology1
Md. Hasib SarowarChittagong University of Engineering & Technology1
Md. Fazlul Karim KhondakarChittagong University of Engineering & Technology1
Himaddri Shakhar RoyChittagong University of Engineering & Technology1
Habib UllahChittagong University of Engineering & Technology1
Riaj AhmedChittagong University of Engineering & Technology1
Piyas ChowdhuryChittagong University of Engineering & Technology1
Nishako ChakmaChittagong University of Engineering & Technology1
Quazi Delwar HssainChittagong University of Engineering & Technology1
Md. Motahar HossainMilitary Institute of Science and Technology1
Md Hossam-E-HaiderMilitary Institute of Science and Technology1
Mohiuddin AhmadKhulna University of Engineering and Technology1
Rubana Hoque ChowdhuryAffiliation unknown1
Roma SultanaAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Okt 2026, last seen 27 Okt 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Single feed circularly polarized crescent-cut and extended corner square microstrip antennas for wireless biotelemetry</dc:title><dc:creator>Chowdhury, Mehdi Hasan</dc:creator><dc:creator>Hossain, Quazi Delwar</dc:creator><dc:creator>Hossain, Md. Azad</dc:creator><dc:creator>Cheung, Ray Chak Chung</dc:creator><dc:description>&lt;jats:p&gt;&amp;lt;p&amp;gt;In this paper, the development of two novel circularly polarized microstrip antennas is thoroughly explained. These antennas are fed by coaxial feeding technique. One of the primary objectives of the proposed work is to tune the antennas to work in ISM band. This frequency band refers to the internationally recognized radio frequency bandwidth which is to be used explicitly for Industrial, Scientific, and Medical applications. Therefore, these antennas would be suitable to use in the field of wireless biotelemetry. Two new antenna design techniques have been introduced to produce circular polarization, and details of these schemes are described. The proposed microstrip antennas are designed and simulated on Advanced Design System (ADS) software. The return loss of the proposed crescent-cut antenna is -19.3 dB at the operating frequency. The extended corner antenna has the return loss of -29.3 dB at the tuned frequency. The simulation results are also presented and discussed.&amp;lt;/p&amp;gt;&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2019-06-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v9i3.pp1902-1909</dc:identifier><dc:identifier>10.11591/ijece.v9i3.pp1902-1909</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 9 No 3 (2019); 1902</dc:source><dc:source>2088-8708</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/13168/12875</dc:relation><dc:rights>http://creativecommons.org/licenses/by-nc/4.0</dc:rights></oai_dc:dc>