Melola Discovery

← Melola Discovery

Open access Jurnal SINTA 1

Evaluation of earth fault location algorithm in medium voltage distribution network with correction technique

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 9 No. 3 (2019)

DOI
10.11591/ijece.v9i3.pp1987-1996
ISSN
2088-8708, 2088-8708
Published
2019-06-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-nc/4.0

Abstract

This paper focused on studying an algorithm of earth fault location in the medium voltage distribution network. In power system network, most of the earth fault occurs is a single line to ground fault. A medium voltage distribution network with resistance earthing at the main substation and an earth fault attached along the distribution network is modeled in ATP Draw. The generated earth fault is simulated, and the voltage and current signal produced is recorded. The earth fault location algorithm is simulated and tested in MATLAB. The accuracy of the earth fault location algorithm is tested at several locations and fault resistances. A possible correction technique is explained to minimize the error. The results show an improvement fault location distance estimation with minimum error.

Collaboration network of the authors

21 authors · 61 co-authorship links · 7 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universiti Malaysia Perlis
  • University of Malaya
  • Universitas Airlangga
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Muhd Hafizi IdrisUniversiti Malaysia Perlis2
Hazlie MokhlisUniversity of Malaya1
Lilik Jamilatul AwalinUniversitas Airlangga1
Mohammad Faridun Naim TajuddinUniversiti Malaysia Perlis1
Nurul Fatin NadhirahUniversiti Malaysia Perlis1
Hana Abdull HalimUniversiti Malaysia Perlis1
Nurhakimah Mohd MukhtarUniversiti Malaysia Perlis1
Noor Fazliana FadzailUniversiti Malaysia Perlis1
Ernie Che MidUniversiti Malaysia Perlis1
Aiman Arif Mohd SallehuddinUniversiti Malaysia Perlis1
Shaiful Rizam ShamsudinUniversiti Malaysia Perlis1
Nusaybah Mohd HusinUniversiti Malaysia Perlis1
Nur Syakirah Mohammed HaniffUniversiti Malaysia Perlis1
Mahalaksmi GunasilanUniversiti Malaysia Perlis1
Melaty AmirruddinUniversiti Malaysia Perlis1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Okt 2026, last seen 27 Okt 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Evaluation of earth fault location algorithm in medium voltage distribution network with correction technique</dc:title><dc:creator>Jamili, N. S. B.</dc:creator><dc:creator>Adzman, M. R.</dc:creator><dc:creator>Rahim, S. R. A.</dc:creator><dc:creator>Zali, S. M.</dc:creator><dc:creator>Isa, M.</dc:creator><dc:creator>Hanafi, H.</dc:creator><dc:description>&lt;jats:p&gt;This paper focused on studying an algorithm of earth fault location in the medium voltage distribution network. In power system network, most of the earth fault occurs is a single line to ground fault. A medium voltage distribution network with resistance earthing at the main substation and an earth fault attached along the distribution network is modeled in ATP Draw. The generated earth fault is simulated, and the voltage and current signal produced is recorded. The earth fault location algorithm is simulated and tested in MATLAB. The accuracy of the earth fault location algorithm is tested at several locations and fault resistances. A possible correction technique is explained to minimize the error. The results show an improvement fault location distance estimation with minimum error.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2019-06-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v9i3.pp1987-1996</dc:identifier><dc:identifier>10.11591/ijece.v9i3.pp1987-1996</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 9 No 3 (2019); 1987</dc:source><dc:source>2088-8708</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/17261/12853</dc:relation><dc:rights>http://creativecommons.org/licenses/by-nc/4.0</dc:rights></oai_dc:dc>