Melola Discovery

← Melola Discovery

Open access Jurnal SINTA 1

PV-Transformer-Less Inverter Topology for Battery-Equivalent DC Supply from Leakage Current

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 6 No. 5 (2016)

DOI
10.11591/ijece.v6i5.pp2025-2032
ISSN
2088-8708, 2088-8708
Published
2016-10-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-nc/4.0

Abstract

Solar panels used for electricity generation have got inverters as their core components. Such inverters are made from switching devices coupled with additional circuit component configured in a transformer-less topology in recent reported works. A transformer-less topology suffers from the drawbacks of lack of isolation leading to leakage current flow from various points of it down to ground. The leakage in inverters might be troublesome as it may lead to loss in power, and may cause malfunctioning of analog devices normally used in power inverters. In this work, we identify possible leakage currents in a given transformer-less topology using the circuit analysis principles. The conversion of so obtained leakage currents into a useful DC voltage is carried out in this work. This work focuses on converting leakage current into small DC voltage in the range of ~1.1004V using recently reported rectifier circuits, supplying a load of 200Ω in the mW range. Although small in magnitude, such voltage sources could be used for battery charging purposes or driving small loads.

Collaboration network of the authors

7 authors · 13 co-authorship links · 3 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Uttara University
  • International Islamic University Malaysia
  • Independent University, Bangladesh
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Nitu SyedIndependent University, Bangladesh1
Tanjib RubaiyatAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Okt 2026, last seen 27 Okt 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>PV-Transformer-Less Inverter Topology for Battery-Equivalent DC Supply from Leakage Current</dc:title><dc:creator>N. H. Khan, Md.</dc:creator><dc:creator>Anowar, Md. T.</dc:creator><dc:creator>Hossen, Md. D.</dc:creator><dc:creator>M. Alam, Md.</dc:creator><dc:creator>Ahmad, K. J.</dc:creator><dc:description>&lt;jats:p&gt;&amp;lt;p&amp;gt;Solar panels used for electricity generation have got inverters as their core components. Such inverters are made from switching devices coupled with additional circuit component configured in a transformer-less topology in recent reported works. A transformer-less topology suffers from the drawbacks of lack of isolation leading to leakage current flow from various points of it down to ground. The leakage in inverters might be troublesome as it may lead to loss in power, and may cause malfunctioning of analog devices normally used in power inverters. In this work, we identify possible leakage currents in a given transformer-less topology using the circuit analysis principles. The conversion of so obtained leakage currents into a useful DC voltage is carried out in this work. This work focuses on converting leakage current into small DC voltage in the range of ~1.1004V using recently reported rectifier circuits, supplying a load of 200Ω in the mW range. Although small in magnitude, such voltage sources could be used for battery charging purposes or driving small loads.&amp;lt;/p&amp;gt;&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2016-10-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v6i5.pp2025-2032</dc:identifier><dc:identifier>10.11591/ijece.v6i5.pp2025-2032</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 6 No 5 (2016); 2025</dc:source><dc:source>2088-8708</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/1127/4114</dc:relation><dc:rights>http://creativecommons.org/licenses/by-nc/4.0</dc:rights></oai_dc:dc>