Melola Discovery

← Melola Discovery

Jurnal

Desain Turbin Angin Horisontal untuk Area Kecepatan Angin Rendah dengan Airfoil S826

Journal of Science and Applicative Technology · Vol. 4 No. 2 (2020)

DOI
10.35472/jsat.v4i2.272
ISSN
2581-0545
Terbit
2020-12-20
Penerbit
Institut Teknologi Sumatra

Abstrak

This research aims to determine performance of turbine rotor performance with a single rotor blade model with a diameter of 0.6 m that has been developed by NORCOWE, while for turbine rotor blades used is the NREL S826 airfoil series. The wind turbines are operated at wind speed intervals of 1-5 m / s. This parameter will also present data in the form of the optimal point of wind turbine rotation and rotor rotation speed. The pitch angles used are 25 °, 30 °, and 35 °. The pitch angle that affects the value of the ideal rotational speed with the highest optimization for the horizontal airfoil turbine S826 is 30 ° with a wind speed of 5 m / s and a rotation of 570 RPM. This is because the greater the pitch angle of the installation, the easier it will be to experience speed trimming but is vulnerable to too large an angle of attack that causes a stall.

Jaringan kolaborasi para penulis

37 penulis · 128 tautan kepenulisan bersama · 24 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Sumatera Institute of Technology
  • Universitas Tidar
  • Universitas Gadjah Mada
  • Universitas Pembangunan Nasional Veteran Yogyakarta
  • University of Technology Malaysia
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Fajar PaundraSumatera Institute of Technology7
Eko PujiyuliantoSumatera Institute of Technology5
Devia Gahana Cindi AlfianSumatera Institute of Technology4
Fajar Perdana NurullahSumatera Institute of Technology3
Kardo RajagukgukSumatera Institute of Technology3
Didik SupriyadiSumatera Institute of Technology3
Rico Aditia PrahmanaSumatera Institute of Technology3
Dicky Januarizky SilitongaSumatera Institute of Technology3
Farid Nanda SyanurSumatera Institute of Technology2
Muhamad F. ArifSumatera Institute of Technology2
Dzikrina Salsabila YasminSumatera Institute of Technology2
M. Farhan SidikSumatera Institute of Technology1
Rizky SaputraSumatera Institute of Technology1
Dimas AldyansyahSumatera Institute of Technology1
Gilang Putra WibawaSumatera Institute of Technology1
Muhammad SyaukaniSumatera Institute of Technology1
Imam PrabowoUniversitas Pembangunan Nasional Veteran Yogyakarta1
Fajri KurniawanUniversity of Technology Malaysia1
Akhmad NurdinUniversitas Tidar1
Iqbal Zulfikar Alief UtamaUniversitas Tidar1
Angger Bagus PrasetiyoUniversitas Tidar1
Rosyidi HidayatAfiliasi tidak diketahui1
Rihardian Maulana WicaksonoSumatera Institute of Technology1
Andi Rahadiyan WijayaUniversitas Gadjah Mada1
I Gusti Bagus Budi DharmaUniversitas Gadjah Mada1
Wahyu Solafide SipahutarSumatera Institute of Technology1
Riyan FerdiyantoSumatera Institute of Technology1
Arysca Wisnu SatriaSumatera Institute of Technology1
Dian Anggria SariSumatera Institute of Technology1
Hida Arliani Nur AnisaSumatera Institute of Technology1
Dika Ariyanto AriyantoSumatera Institute of Technology1
Khaerunissa Anbar IstiadiSumatera Institute of Technology1
Alawiyah AlawiyahSumatera Institute of Technology1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Data ini berasal dari Crossref (yang disetorkan penerbit), karena endpoint OAI-PMH milik jurnal tidak dapat di-harvest.

Sumber metadata: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2581-0545/works, pertama di-harvest 5 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata sebagai oai_dc, dikonversi dari Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Desain Turbin Angin Horisontal untuk Area Kecepatan Angin Rendah dengan Airfoil S826</dc:title><dc:creator>Buana, Setiadi Wira</dc:creator><dc:creator>Yunesti, Putty</dc:creator><dc:creator>Persada, Guna Bangun</dc:creator><dc:creator>Muhyi, Abdul</dc:creator><dc:description>&lt;jats:p&gt;This research aims to determine performance of turbine rotor performance with a single rotor blade model with a diameter of 0.6 m that has been developed by NORCOWE, while for turbine rotor blades used is the NREL S826 airfoil series. The wind turbines are operated at wind speed intervals of 1-5 m / s. This parameter will also present data in the form of the optimal point of wind turbine rotation and rotor rotation speed. The pitch angles used are 25 °, 30 °, and 35 °. The pitch angle that affects the value of the ideal rotational speed with the highest optimization for the horizontal airfoil turbine S826 is 30 ° with a wind speed of 5 m / s and a rotation of 570 RPM. This is because the greater the pitch angle of the installation, the easier it will be to experience speed trimming but is vulnerable to too large an angle of attack that causes a stall.&lt;/jats:p&gt;</dc:description><dc:publisher>Institut Teknologi Sumatra</dc:publisher><dc:date>2020-12-20</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.35472/jsat.v4i2.272</dc:identifier><dc:identifier>10.35472/jsat.v4i2.272</dc:identifier><dc:source>Journal of Science and Applicative Technology; Vol 4 No 2 (2020); 86</dc:source><dc:source>2581-0545</dc:source><dc:relation>https://journal.itera.ac.id/index.php/jsat/article/download/272/122</dc:relation></oai_dc:dc>