Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Design and analysis of Micro-Cantilever based Biosensor for Swine flu Detection

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 6 No. 3 (2016)

DOI
10.11591/ijece.v6i3.pp1190-1196
ISSN
2088-8708, 2088-8708
Terbit
2016-06-01
Penerbit
Institute of Advanced Engineering and Science
Lisensi
creativecommons.org/licenses/by-nc/4.0

Abstrak

Swine flu which comes under the category of influenza is caused by N1H1 virus. This Disease in 2009 was termed as pandemic by WHO (World Health Organisation). It was fast spreading almost all over the world then. It is same as normal Flu and can be prevented by flu shots/vaccines. The real importance of the disease is because, it may cause serious health conditions like Pneumonia, Respiratory asthma, bronchitis different types of mucus line cancers,unlike normal flu. Sometimes human life can be endangered by post effects of Swine flu. According to a study Infant mortality is because due to lack of detection of diseases. Thus Detection of Swine flu virus, which is cause for infant mortality is important. This can be done using the most trusted form by using MEMS. In this paper the Micro-Cantilever is used as the sensing unit. Using COMSOL 4.3b, we designed rectangular cantilever and also a rectangle with a hole punched forming SCR (Stress Concentration Region) concept, analysed and optimized.

Jaringan kolaborasi para penulis

2 penulis · 1 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Koneru Lakshmaiah Education Foundation
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Data ini berasal dari Crossref (yang disetorkan penerbit), karena endpoint OAI-PMH milik jurnal tidak dapat di-harvest.

Sumber metadata: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, pertama di-harvest 27 Okt 2026, terakhir terlihat 15 Nov 2026.
Metadata sebagai oai_dc, dikonversi dari Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Design and analysis of Micro-Cantilever based Biosensor for Swine flu Detection</dc:title><dc:creator>Jithendra Prasad, M.G.G.</dc:creator><dc:creator>Syed, Shameem</dc:creator><dc:description>&lt;jats:p&gt;Swine flu which comes under the category of influenza is caused by N1H1 virus. This Disease in 2009 was termed as pandemic by WHO (World Health Organisation). It was fast spreading almost all over the world then. It is same as normal Flu and can be prevented by flu shots/vaccines. The real importance of the disease is because , it may cause serious health conditions like Pneumonia, Respiratory asthma, bronchitis different types of mucus line cancers ,unlike normal flu. Sometimes human life can be endangered by post effects of Swine flu. According to a study Infant mortality is because due to lack of detection of diseases. Thus Detection of Swine flu virus, which is cause for infant mortality is important. This can be done using the most trusted form by using MEMS. In this paper the Micro-Cantilever is used as the sensing unit. Using COMSOL 4.3b, we designed rectangular cantilever and also a rectangle with a hole punched forming SCR (Stress Concentration Region) concept, analysed and optimized.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2016-06-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v6i3.pp1190-1196</dc:identifier><dc:identifier>10.11591/ijece.v6i3.pp1190-1196</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 6 No 3 (2016); 1190</dc:source><dc:source>2088-8708</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/475/349</dc:relation><dc:rights>http://creativecommons.org/licenses/by-nc/4.0</dc:rights></oai_dc:dc>