Melola Discovery

← Melola Discovery

Jurnal

STABILITY AND IRRITATION TESTING USING THE PATCH TEST METHOD OF A COMBINATION GEL FORMULATION CONTAINING ALOE VERA AND BASIL LEAF EXTRACTS

Indonesian Journal of Cosmetics · Vol. 1 No. 1 (2023) · hlm. 1–10

DOI
10.35472/ijcos.v1i1.1638
ISSN
3026-3352
Terbit
2023-10-20
Penerbit
Institut Teknologi Sumatra

Abstrak

Aloe vera and basil leaves have been recognized for their anti-inflammatory and antibacterial properties. Combining these extracts into a gel formulation offers convenience in application. However, research concerning potential irritations associated with its use remains limited. This study aims to assess irritation in humans resulting from the application of a gel formulation containing basil and aloe vera extracts using patch testing. The gel formulation is prepared with a 2% concentration of the extracts, with a 1:1 ratio of basil to aloe vera extracts. Optimization is achieved by varying carbopol concentrations and the final pH of the gel formulation. The parameters used for determining the optimal formula include organoleptic characteristics, viscosity, spreadability, adhesiveness, and pH of the formulation. The optimal formula is subsequently subjected to stability testing over four weeks and irritation testing using patch methods. A total of 25 volunteers are involved in the irritation testing. Observations are made up to 72 hours after the removal of the formulation to ensure the absence of delayed irritation effects. Aloe vera and basil extractions using ethanol as a solvent yield sequential yields of 1.7% and 3%, respectively. Quality evaluation for Formulations I (FI), II (FII), and III (FIII) includes spreadability, adhesiveness, and viscosity, as follows: (4.1 cm; 5.4 seconds; 5504 mPa.s); (6.5 cm; 4.1 seconds; 3480 mPa.s); and (5.2 cm; 4.2 seconds; 6340 mPa.s), respectively. FII is selected as the optimal formula because it exhibits wider spreadability and lower viscosity compared to FI and FIII (P 0.05). The Primary Irritation Index (PII) for FII has a value of 0.0216, indicating that it does not cause irritation during patch testing.

Jaringan kolaborasi para penulis

19 penulis · 66 tautan kepenulisan bersama · 8 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Sumatera Institute of Technology
  • Universitas Muhammadiyah Lampung
  • Universitas Islam Negeri Ar-Raniry
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Aida Febina SholehaSumatera Institute of Technology6
Tri NoviantoroUniversitas Muhammadiyah Lampung5
Wafiq Azizah MuhtarSumatera Institute of Technology4
Tikarahayu PutriSumatera Institute of Technology4
Indah Puspita SariSumatera Institute of Technology3
Iwan SaputraAfiliasi tidak diketahui3
Annisaa Siti ZulaichaSumatera Institute of Technology3
Veni Putri NurhayatiSumatera Institute of Technology3
Petrus Alvin Peter Ambarita AmbaritaAfiliasi tidak diketahui2
Muhammad RezaUniversitas Islam Negeri Ar-Raniry1
Herayati HerayatiAfiliasi tidak diketahui1
Puput Puji AstutiAfiliasi tidak diketahui1
Elianasari ElianasariSumatera Institute of Technology1
Annisa Rahma AriantiSumatera Institute of Technology1
Sabili RahmadiniSumatera Institute of Technology1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Data ini berasal dari Crossref (yang disetorkan penerbit), karena endpoint OAI-PMH milik jurnal tidak dapat di-harvest.

Sumber metadata: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/3026-3352/works, pertama di-harvest 5 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata sebagai oai_dc, dikonversi dari Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>STABILITY AND IRRITATION TESTING USING THE PATCH TEST METHOD OF A COMBINATION GEL FORMULATION CONTAINING ALOE VERA AND BASIL LEAF EXTRACTS</dc:title><dc:creator>Yasir, Angga Saputra</dc:creator><dc:creator>Suryaneta, Suryaneta</dc:creator><dc:creator>Handayani, Kiki Yuli</dc:creator><dc:creator>Satria, Bagus</dc:creator><dc:description>&lt;jats:p&gt;Aloe vera and basil leaves have been recognized for their anti-inflammatory and antibacterial properties. Combining these extracts into a gel formulation offers convenience in application. However, research concerning potential irritations associated with its use remains limited. This study aims to assess irritation in humans resulting from the application of a gel formulation containing basil and aloe vera extracts using patch testing. The gel formulation is prepared with a 2% concentration of the extracts, with a 1:1 ratio of basil to aloe vera extracts. Optimization is achieved by varying carbopol concentrations and the final pH of the gel formulation. The parameters used for determining the optimal formula include organoleptic characteristics, viscosity, spreadability, adhesiveness, and pH of the formulation. The optimal formula is subsequently subjected to stability testing over four weeks and irritation testing using patch methods. A total of 25 volunteers are involved in the irritation testing. Observations are made up to 72 hours after the removal of the formulation to ensure the absence of delayed irritation effects. Aloe vera and basil extractions using ethanol as a solvent yield sequential yields of 1.7% and 3%, respectively. Quality evaluation for Formulations I (FI), II (FII), and III (FIII) includes spreadability, adhesiveness, and viscosity, as follows: (4.1 cm; 5.4 seconds; 5504 mPa.s); (6.5 cm; 4.1 seconds; 3480 mPa.s); and (5.2 cm; 4.2 seconds; 6340 mPa.s), respectively. FII is selected as the optimal formula because it exhibits wider spreadability and lower viscosity compared to FI and FIII (P &amp;lt;0.05). Stability testing for FII shows that the formula remains stable during storage for all quality testing parameters (P &amp;gt; 0.05). The Primary Irritation Index (PII) for FII has a value of 0.0216, indicating that it does not cause irritation during patch testing.&lt;/jats:p&gt;</dc:description><dc:publisher>Institut Teknologi Sumatra</dc:publisher><dc:date>2023-10-20</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.35472/ijcos.v1i1.1638</dc:identifier><dc:identifier>10.35472/ijcos.v1i1.1638</dc:identifier><dc:source>Indonesian Journal of Cosmetics; Vol 1 No 1 (2023); 1-10</dc:source><dc:source>3026-3352</dc:source><dc:relation>https://journal.itera.ac.id/index.php/ijcos/article/download/1638/452</dc:relation></oai_dc:dc>