Melola Discovery

← Melola Discovery

Open access Jurnal SINTA 1

Modular multilevel inverter for renewable energy applications

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 10 No. 1 (2020)

DOI
10.11591/ijece.v10i1.pp1-14
ISSN
2088-8708, 2088-8708
Published
2020-02-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-nc/4.0

Abstract

This paper proposes a Multilevel Inverter (MLI) which focuses on two objective, minimal voltage sources and lesser switching component. The proposed Asymmetrical Cascaded Multilevel Inverter (ACMLI) is able to achieve the objective by selectively opting the voltage level of DC sources chosen and implementing the mathematical operation of addition and subtraction on the DC sources. This system also utilizes multiple carrier sinusoidal pulse width modulation technique (MCS-PWM) for operating the switches. It is found that the number of switches required for proposed modular bridge ACMLI and modified H bridge ACMLI was lesser than the traditional Cascaded H bridge Multilevel Inverter (CHB-MLI). It is also evident that the number of DC voltage sources and filter required for smoothing the output waveform is reduced compared to the traditional MLI. The Total Harmonic Distortion (THD) for the proposed circuit was simulated and analyzed in MATLAB Simulink environment and the results are found to be very less and satisfactory. The proposed circuit can find its application in integrating Renewable Energy Sources (RES) to the utility grid, Electrical Vehicle (EV), harmonic reduction and so on. The simulation results of the proposed circuits are tabulated and compared with the traditional cascaded MLI.

Collaboration network of the authors

5 authors · 5 co-authorship links · 2 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Hindustan Institute of Technology and Science
  • Vellore Institute of Technology University
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
N. Mahiban LindsayHindustan Institute of Technology and Science1
Karthik Vilapakkam NagarajanHindustan Institute of Technology and Science1
Arul RajagopalanVellore Institute of Technology University1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Okt 2026, last seen 27 Okt 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Modular multilevel inverter for renewable energy applications</dc:title><dc:creator>A., Arikesh</dc:creator><dc:creator>Parvathy, A. K.</dc:creator><dc:description>&lt;jats:p&gt;&amp;lt;p&amp;gt;This paper proposes a Multilevel Inverter (MLI) which focuses on two objective , minimal voltage sources and lesser switching component. The proposed Asymmetrical Cascaded Multilevel Inverter (ACMLI) is able to achieve the objective by selectively opting the voltage level of DC sources chosen and implementing the mathematical operation of addition and subtraction on the DC sources. This system also utilizes multiple carrier sinusoidal pulse width modulation technique (MCS-PWM) for operating the switches. It is found that the number of switches required for proposed modular bridge ACMLI and modified H bridge ACMLI was lesser than the traditional Cascaded H bridge Multilevel Inverter (CHB-MLI). It is also evident that the number of DC voltage sources and filter required for smoothing the output waveform is reduced compared to the traditional MLI. The Total Harmonic Distortion (THD) for the proposed circuit was simulated and analyzed in MATLAB Simulink environment and the results are found to be very less and satisfactory. The proposed circuit can find its application in integrating Renewable Energy Sources (RES) to the utility grid, Electrical Vehicle (EV) , harmonic reduction and so on. The simulation results of the proposed circuits are tabulated and compared with the traditional cascaded MLI.&amp;lt;/p&amp;gt;&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2020-02-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v10i1.pp1-14</dc:identifier><dc:identifier>10.11591/ijece.v10i1.pp1-14</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 10 No 1 (2020); 1</dc:source><dc:source>2088-8708</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/14050/13392</dc:relation><dc:rights>http://creativecommons.org/licenses/by-nc/4.0</dc:rights></oai_dc:dc>