Today, Hygroscopic swelling is one of the biggest challenging problem of Epoxy mold compound (EMC) in packaging with Microelectromechanical system (MEMS) devices. To overcome this hygroscopic swelling problem of EMC and guard the devices, MEMS devices are molded in this paper with different Mold Compound (MC) i.e. titanium and ceramic etc. during their interconnection with the board. Also, a comparatively performance analysis of this various mold compound with MEMS pressure sensor has been studied in this paper at 60% humidity, 140 mol/m 3 saturation concentration and 25 o C. It was observed that hygroscopic swelling does not take place in the titanium mold compound. But, titanium is very costly so we have to consider something cheaper material i.e. ceramic in this paper. The Hygroscopic swelling in Ceramic Mold Compound after 1 year is nearly 0.05mm which is very less than epoxy.
Jaringan kolaborasi para penulis
5 penulis ·
5 tautan kepenulisan bersama
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
Guru Jambheshwar University of Science and Technology
Afiliasi tidak diketahui
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.