Accelerometers are widely used in several mechanisms of high sensitivity. They are employed for example in tilt-control in spacecraft, inertial navigation, oil exploration, seismic monitoring, etc. In order to improve the sensitivity of the measurements, implementation of Displacement-amplifying Compliant Mechanisms (DaCMs) in a capacitive accelerometer have been reported in the literature. In this paper, a system composed of two elements; capacitive accelerometer with extended beams (CAEB) and a DaCM geometry, of single and souble layer, are analysed. Three materials were considered, in the case, for the second layer. The DaCM implementation improves the operation frequency and displacement sensitivity, under different proportions, at the same time. Furthermore, three sweeps were performed: a range of thickness from 25 µm up to 30 µm (to determine the appropriate silicon mass value, using SOI technology), a range of second layer thickness (to choose the more appropriate material and its thickness) and a range of gravity values (to determine the maximum normal stress in the beams, which defines the superior value of the g operation range). The in-plane mode (y-axis) was considered in all analysed cases. This characterization was developed using the Finite Element Method. Structural and modal analysis responses were under study.
Jaringan kolaborasi para penulis
9 penulis ·
29 tautan kepenulisan bersama
· 7 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
Universidad Autónoma del Estado de Morelos
National Institute of Astrophysics, Optics and Electronics
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.