Melola Discovery

← Melola Discovery

Open access Jurnal SINTA 1

Analysis of the impact of metal thickness and geometric parameters on the quality factor-Q in integrated spiral inductors by means of artificial bee colony technique

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 9 No. 4 (2019)

DOI
10.11591/ijece.v9i4.pp2918-2931
ISSN
2088-8708, 2088-8708
Published
2019-08-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-nc/4.0

Abstract

The goal of this present paper is to design, analysis the influence of the inductor geometrical parameters and the effect of the metal thickness on the quality factor-Q in integrated square spiral inductor using an efficient application of the artificial bee colony (ABC) algorithm. The inductors were optimized at 2.4 GHz to determinate their major geometrical dimensions (sp, w, din…) and their number of turns, for uses in radio-frequency integrated circuits (RFICs). The optimization results are validated by the simulation using an electromagnetic simulator (ADS-Momentum). Using matlab software, the study on the impact of the effect of geometrical parameters and the effect of metal thickness, on the factor of quality-Q of spiral inductors, is shown. We first reported that it is possible to improve Q-factors further by increasing the metal thickness, and in the design of inductor; a compromise must be reached between the value of w, n, sp and din to achieve the desired quality factor-Q and other electrical parameters.

Collaboration network of the authors

22 authors · 43 co-authorship links · 12 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • University of Hassan II Casablanca
  • Sidi Mohamed Ben Abdellah University
  • Université Moulay Ismail de Meknes
  • Abdelmalek Essaâdi University
  • Université Hassan 1er
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Abdennaceur BaghdadUniversity of Hassan II Casablanca3
Souad AkkaderUniversity of Hassan II Casablanca3
Izeddine ZorkaniSidi Mohamed Ben Abdellah University2
Bouchaib CherradiUniversity of Hassan II Casablanca2
Issa SabiriUniversity of Hassan II Casablanca2
Kritele LoubnaSidi Mohamed Ben Abdellah University1
El Beqal AsmaeSidi Mohamed Ben Abdellah University1
Soufiane HamidaUniversity of Hassan II Casablanca1
Oussama El GannourUniversity of Hassan II Casablanca1
Hassan OuajjiUniversity of Hassan II Casablanca1
Imad El HajjamiAffiliation unknown1
Soufiane AbiUniversité Moulay Ismail de Meknes1
Brahim OuachaUniversity of Hassan II Casablanca1
Mohammed NahidUniversity of Hassan II Casablanca1
Said AbennaUniversity of Hassan II Casablanca1
Asmae OuhmidaUniversity of Hassan II Casablanca1
Sara SandabadUniversity of Hassan II Casablanca1
Yassine GmihUniversité Hassan 1er1
Aziz DkiouakAbdelmalek Essaâdi University1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Okt 2026, last seen 27 Okt 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Analysis of the impact of metal thickness and geometric parameters on the quality factor-Q in integrated spiral inductors by means of artificial bee colony technique</dc:title><dc:creator>Bouyghf, Hamid</dc:creator><dc:creator>Benhala, Bachir</dc:creator><dc:creator>Raihani, Abdelhadi</dc:creator><dc:description>&lt;jats:p&gt;The goal of this present paper is to design, analysis the influence of the inductor geometrical parameters and the effect of the metal thickness on the quality factor-Q in integrated square spiral inductor using an efficient application of the artificial bee colony (ABC) algorithm. The inductors were optimized at 2.4 GHz to determinate their major geometrical dimensions (sp, w, din…) and their number of turns, for uses in radio-frequency integrated circuits (RFICs). The optimization results are validated by the simulation using an electromagnetic simulator (ADS-Momentum). Using matlab software, the study on the impact of the effect of geometrical parameters and the effect of metal thickness, on the factor of quality-Q of spiral inductors, is shown. We first reported that it is possible to improve Q-factors further by increasing the metal thickness, and in the design of inductor; a compromise must be reached between the value of w, n, sp and din to achieve the desired quality factor-Q and other electrical parameters.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2019-08-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v9i4.pp2918-2931</dc:identifier><dc:identifier>10.11591/ijece.v9i4.pp2918-2931</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 9 No 4 (2019); 2918</dc:source><dc:source>2088-8708</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/15941/13119</dc:relation><dc:rights>http://creativecommons.org/licenses/by-nc/4.0</dc:rights></oai_dc:dc>