Melola Discovery

← Melola Discovery

Jurnal Tanpa peringkat SINTA

Impact of Bagasse Carbonization Temperature on Activated Carbon Properties for Chromium Hexavalent Adsorption and an Environmental Analysis

Jurnal Bahan Alam Terbarukan · Vol. 14 No. 1 (2025) · hlm. 33–44

DOI
10.15294/jbat.v14i1.23601
ISSN
2407-2370, 2303-0623
Terbit
2025-07-01
Penerbit
Universitas Negeri Semarang
Bahasa
eng

Abstrak

The electroplating industry releases a high concentration of Chromium Hexavalent [Cr(VI)] up to 48.7 mg/L, significantly surpassing the quality standard of 0.1 mg/L. The activated carbon adsorption process is a cost-effective and straightforward approch to reducing the concentration of Cr(VI). Activated carbon can be produced from bagasse which is rich in cellulose. Due to limited information on the effect of carbonization temperature on the properties of activated carbon from bagasse, this study aims to identify the effect of carbonization temperature range from 450°C to 600°C and how it affects the performance of adsorbing Cr(VI). In addition, this study analyses the environmental impact of activated carbon production from bagasse with different temperature operating conditions through life cycle assessment. The research has four stages: carbonization, activation, adsorption, and environmental impact analysis. The result indicates that higher temperatures enhance the performance of activated carbon to adsorb Cr(VI) and produce the best-activated carbon quality. However, the environmental impact of performing at the highest temperature (600°C) is also the highest while having the lowest yield. Therefore, a temperature of 550°C is suggested to achieve fair product quality with good adsorbing performance, high yield, and less harming the environment. The hotspots of the production process lie in the freshwater aquatic ecotoxicity, acidification, and human toxicity due to using of H2SO4 and electricity.

Kata kunci

Jaringan kolaborasi para penulis

10 penulis · 17 tautan kepenulisan bersama · 2 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Sultan Agung Islamic University
  • University of Brawijaya
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Bambang IsmuyantoUniversity of Brawijaya2
Moh. SholichinAfiliasi tidak diketahui2
Azmia Rizka NafisahAfiliasi tidak diketahui1
Fadhil Muhammad TarmidziAfiliasi tidak diketahui1
Noveri AisyarohSultan Agung Islamic University1
Alfiah RahmawatiSultan Agung Islamic University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unnes.ac.id/journals/jbat/oai, pertama di-harvest 6 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Impact of Bagasse Carbonization Temperature on Activated Carbon Properties for Chromium Hexavalent Adsorption and an Environmental Analysis</dc:title>
	<dc:creator xml:lang="en">A.S. Dwi Saptati Nur Hidayati</dc:creator>
	<dc:creator xml:lang="en">Maulida Zumrotul Azizah</dc:creator>
	<dc:creator xml:lang="en">Nur Rochmah Septia Amanda</dc:creator>
	<dc:creator xml:lang="en">Dian Rahmawati</dc:creator>
	<dc:subject xml:lang="en">activated carbon</dc:subject>
	<dc:subject xml:lang="en">Chromium Hexavalent</dc:subject>
	<dc:subject xml:lang="en">life cycle assessment</dc:subject>
	<dc:description xml:lang="en">The electroplating industry releases a high concentration of Chromium Hexavalent [Cr(VI)] up to 48.7 mg/L, significantly surpassing the quality standard of 0.1 mg/L. The activated carbon adsorption process is a cost-effective and straightforward approch to reducing the concentration of Cr(VI). Activated carbon can be produced from bagasse which is rich in cellulose. Due to limited information on the effect of carbonization temperature on the properties of activated carbon from bagasse, this study aims to identify the effect of carbonization temperature range from 450°C to 600°C and how it affects the performance of adsorbing Cr(VI). In addition, this study analyses the environmental impact of activated carbon production from bagasse with different temperature operating conditions through life cycle assessment. The research has four stages: carbonization, activation, adsorption, and environmental impact analysis. The result indicates that higher temperatures enhance the performance of activated carbon to adsorb Cr(VI) and produce the best-activated carbon quality. However, the environmental impact of performing at the highest temperature (600°C) is also the highest while having the lowest yield. Therefore, a temperature of 550°C is suggested to achieve fair product quality with good adsorbing performance, high yield, and less harming the environment. The hotspots of the production process lie in the freshwater aquatic ecotoxicity, acidification, and human toxicity due to using of H2SO4 and electricity.</dc:description>
	<dc:publisher xml:lang="en">Universitas Negeri Semarang</dc:publisher>
	<dc:date>2025-07-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unnes.ac.id/journals/jbat/article/view/23601</dc:identifier>
	<dc:identifier>10.15294/jbat.v14i1.23601</dc:identifier>
	<dc:source xml:lang="en">Jurnal Bahan Alam Terbarukan; Vol. 14 No. 1 (2025): June 2025 [Nationally Accredited Sinta 3] ; 33 - 44</dc:source>
	<dc:source>2407-2370</dc:source>
	<dc:source>2303-0623</dc:source>
	<dc:source>10.15294/jbat.v14i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.unnes.ac.id/journals/jbat/article/view/23601/4375</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2025 Jurnal Bahan Alam Terbarukan</dc:rights>
</oai_dc:dc>