Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

FPGA Based Control Method for Three Phase BLDC Motor

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 6 No. 4 (2016)

DOI
10.11591/ijece.v6i4.pp1434-1440
ISSN
2088-8708, 2088-8708
Terbit
2016-08-01
Penerbit
Institute of Advanced Engineering and Science
Lisensi
creativecommons.org/licenses/by-nc/4.0

Abstrak

This paper introduces a good method which is helpful to assist in the design and control of cost effective, efficient Brushless Direct Current (BLDC) motors. Speed Control of BLDC motor using PIC microcontrollers requires more hardware, and with the availability of FPGA versatile features motivated to develop a cost effective and reliable control with variable speed range. In this paper, an algorithm which uses the Resolver signals captured from the motor is developed with the help of Resolver to Digital converters. The program has been written using VHDL. This program generates the firing pulses required to drive the MOSFETs of three phase fully controlled bridge converter driven by drivers. Then the program has been loaded on the Spartan- 3 FPGA device and tested on the 30V, 2000 rpm BLDC motor which can make the motor run at constant speed ranging from 10 to 2000 rpm. The proposed hardware and the program are found to be very good and efficient. The results are good compare to PIC Microcontroller based design.

Jaringan kolaborasi para penulis

3 penulis · 3 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Visvesvaraya Technological University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Data ini berasal dari Crossref (yang disetorkan penerbit), karena endpoint OAI-PMH milik jurnal tidak dapat di-harvest.

Sumber metadata: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, pertama di-harvest 27 Okt 2026, terakhir terlihat 15 Nov 2026.
Metadata sebagai oai_dc, dikonversi dari Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>FPGA Based Control Method for Three Phase BLDC Motor</dc:title><dc:creator>Suneeta, Suneeta</dc:creator><dc:creator>Srinivasan, R</dc:creator><dc:creator>Sagar, Ram</dc:creator><dc:description>&lt;jats:p&gt;This paper introduces a good method which is helpful to assist in the design and control of cost effective, efficient Brushless Direct Current (BLDC) motors. Speed Control of BLDC motor using PIC microcontrollers requires more hardware, and with the availability of FPGA versatile features motivated to develop a cost effective and reliable control with variable speed range. In this paper, an algorithm which uses the Resolver signals captured from the motor is developed with the help of Resolver to Digital converters. The program has been written using VHDL. This program generates the firing pulses required to drive the MOSFETs of three phase fully controlled bridge converter driven by drivers. Then the program has been loaded on the Spartan- 3 FPGA device and tested on the 30V, 2000 rpm BLDC motor which can make the motor run at constant speed ranging from 10 to 2000 rpm. The proposed hardware and the program are found to be very good and efficient. The results are good compare to PIC Microcontroller based design.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2016-08-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v6i4.pp1434-1440</dc:identifier><dc:identifier>10.11591/ijece.v6i4.pp1434-1440</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 6 No 4 (2016); 1434</dc:source><dc:source>2088-8708</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/709/469</dc:relation><dc:rights>http://creativecommons.org/licenses/by-nc/4.0</dc:rights></oai_dc:dc>