Akses terbuka
Jurnal
SINTA 1
Numerical Simulation of Solar Air Heater using Paraffin Wax-Aluminum Compound as Phase Changing Material
Aptisi Transactions on Technopreneurship (ATT) · Vol. 3 No. 2 (2021) · hlm. 164–170
ISSN 2656-8888, 2655-8807
Terbit 2021-09-14
Penerbit Pandawan
Bahasa en
Abstrak
This paper presents a theoretical investigation of solar air heater using phase change material (PCM). PCM used in present configuration is homogenous mixture of paraffin wax with Aluminium powder. The purpose of using Aluminium powder with paraffin wax is to increase the thermal conductivity. PCM mixtures are encapsulated in cylinders and are used as solar absorbers. Using MATLAB program, the effect of different parameters is studied. It has been observed that with increase in mass flow rate, air outlet temperature decreases and freezing time of cylinder decreases. However, at constant mass flow rate, with increase in cylinder radius, air temperature decreases and while freezing time increase sharply. The different parameters have to be chosen such that performance of solar air heater can be optimized.
Jaringan kolaborasi para penulis
6 penulis ·
11 tautan kepenulisan bersama
· 2 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
IFTM University Uttarakhand Technical University Afiliasi tidak diketahui
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.
Sumber metadata: OAI-PMH (metadata jurnal) https://att.aptisi.or.id/index.php/att/oai, pertama di-harvest 6 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
<dc:title xml:lang="en">Numerical Simulation of Solar Air Heater using Paraffin Wax-Aluminum Compound as Phase Changing Material</dc:title>
<dc:creator xml:lang="en">Kumar, Atul </dc:creator>
<dc:creator xml:lang="en">Bhandari, Prabhakar</dc:creator>
<dc:creator xml:lang="en">Rawat, K.S. </dc:creator>
<dc:creator xml:lang="id">Bhandari, Prabhakar</dc:creator>
<dc:subject xml:lang="en">Solar Air Heater</dc:subject>
<dc:subject xml:lang="en">Phase Changing Material</dc:subject>
<dc:subject xml:lang="en">Paraffin Wax</dc:subject>
<dc:subject xml:lang="en">Aluminum</dc:subject>
<dc:subject xml:lang="en">Freezing time</dc:subject>
<dc:description xml:lang="en">This paper presents a theoretical investigation of solar air heater using phase change material (PCM). PCM used in present configuration is homogenous mixture of paraffin wax with Aluminium powder. The purpose of using Aluminium powder with paraffin wax is to increase the thermal conductivity. PCM mixtures are encapsulated in cylinders and are used as solar absorbers. Using MATLAB program, the effect of different parameters is studied. It has been observed that with increase in mass flow rate, air outlet temperature decreases and freezing time of cylinder decreases. However, at constant mass flow rate, with increase in cylinder radius, air temperature decreases and while freezing time increase sharply. The different parameters have&nbsp; to be chosen such that performance of solar air heater can be optimized.</dc:description>
<dc:publisher xml:lang="en">Pandawan</dc:publisher>
<dc:date>2021-09-14</dc:date>
<dc:type>info:eu-repo/semantics/article</dc:type>
<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
<dc:type xml:lang="en">Peer-reviewed Article</dc:type>
<dc:format>application/pdf</dc:format>
<dc:identifier>https://att.aptisi.or.id/index.php/att/article/view/199</dc:identifier>
<dc:identifier>10.34306/att.v3i2.199</dc:identifier>
<dc:source xml:lang="en">Aptisi Transactions on Technopreneurship (ATT); Vol. 3 No. 2 (2021): September; 164-170</dc:source>
<dc:source xml:lang="id">Aptisi Transactions On Technopreneurship (ATT); Vol 3 No 2 (2021): September; 164-170</dc:source>
<dc:source>2656-8888</dc:source>
<dc:source>2655-8807</dc:source>
<dc:source>10.34306/att.v3i2</dc:source>
<dc:language>en</dc:language>
<dc:relation>https://att.aptisi.or.id/index.php/att/article/view/199/151</dc:relation>
<dc:rights xml:lang="en">Copyright (c) 2021 Atul Kumar, Prabhakar Bhandari, K.S. Rawat</dc:rights>
<dc:rights xml:lang="en">https://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>
Sitasi dan pengindeksan
Jumlah menurut tiap indeks pada 13 Nov 2026; setiap indeks menghitung sitasi dengan cara berbeda.
OpenAlex juga mencatat karya ini di: crossref, doaj.
Sitasi artikel ini
APA 7
Kumar, A., Bhandari, P., Rawat, K., & Bhandari, P. (2021). Numerical Simulation of Solar Air Heater using Paraffin Wax-Aluminum Compound as Phase Changing Material. Aptisi Transactions on Technopreneurship (ATT), 3(2), 164–170. https://doi.org/10.34306/att.v3i2.199
Salin
IEEE
A. Kumar, P. Bhandari, K. Rawat, and P. Bhandari, “Numerical Simulation of Solar Air Heater using Paraffin Wax-Aluminum Compound as Phase Changing Material,” Aptisi Transactions on Technopreneurship (ATT), vol. 3, no. 2, pp. 164–170, 2021, doi: 10.34306/att.v3i2.199.
Salin
Dibuat dari metadata jurnal; periksa nama penulis sebelum dipakai.