Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Thermo-Fluidic Modelling of a Heat Exchanger Tube with Conical Shaped Insert having Protrusion and Dimple Roughness

Aptisi Transactions on Technopreneurship (ATT) · Vol. 3 No. 2 (2021) · hlm. 127–143

DOI
10.34306/att.v3i2.200
ISSN
2656-8888, 2655-8807
Terbit
2021-09-08
Penerbit
Pandawan
Bahasa
en
Lisensi
creativecommons.org/licenses/by/4.0

Abstrak

In the present work, thermo-fluidic behavior of a heat exchanger tube with conical shaped insert has been investigated with the help of finite volume method. To enhance the heat transfer rate, two different types of roughness has been used in conical insert i.e. protrusion and dimple roughness. A three-dimensional computational model with RNG turbulence model is used for the simulation and it has been performed for three different diameters (3 mm, 6 mm and 9 mm) and two different pitch space (120 mm and 180 mm) for both protrusion and dimple roughness. The present model has been validated with Dittus-Boelter equation and with Blasius equation for Nusselt number and friction factor, respectively. For a constant heat flux of 1200 W/m2, effect of roughness, diameter and pitch on Nusselt number and friction factor has been predicted for Reynold number range of 5000 to 30000. From the result, it is found that, the protrusion shaped roughness has better thermal performance factor than dimple shape and diameter of 6 mm has performed better than 3 mm and 9 mm for both the cases of roughness due to favorable flow dynamics.

Kata kunci

Jaringan kolaborasi para penulis

6 penulis · 11 tautan kepenulisan bersama · 2 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Uttarakhand Technical University
  • IFTM University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Prabhakar BhandariAfiliasi tidak diketahui2
Atul KumarIFTM University2

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://att.aptisi.or.id/index.php/att/oai, pertama di-harvest 6 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Thermo-Fluidic Modelling of a Heat Exchanger Tube with Conical Shaped Insert having Protrusion and Dimple Roughness</dc:title>
	<dc:creator xml:lang="en">Singh, Bhanu Pratap </dc:creator>
	<dc:creator xml:lang="en">Bisht, Vijay Singh </dc:creator>
	<dc:creator xml:lang="en">Bhandari, Prabhakar </dc:creator>
	<dc:creator xml:lang="en">Rawat, K.S</dc:creator>
	<dc:subject xml:lang="en">Computational fluid dynamics, Heat Exchanger, Conical insert, Dimple shaped roughness, Protrusion roughness</dc:subject>
	<dc:description xml:lang="en">In the present work, thermo-fluidic behavior of a heat exchanger tube with conical shaped insert has been investigated with the help of finite volume method. To enhance the heat transfer rate, two different types of roughness has been used in conical insert i.e. protrusion and dimple roughness. A three-dimensional computational model with &amp;nbsp;RNG turbulence model is used for the simulation and it has been performed for three different diameters (3 mm, 6 mm and 9 mm) and two different pitch space (120 mm and 180 mm) for both protrusion and dimple roughness. The present model has been validated with Dittus-Boelter equation and with Blasius equation for Nusselt number and friction factor, respectively. For a constant heat flux of 1200 W/m2, effect of roughness, diameter and pitch on Nusselt number and friction factor has been predicted for Reynold number range of 5000 to 30000. From the result, it is found that, the protrusion shaped roughness has better thermal performance factor than dimple shape and diameter of 6 mm has performed better than 3 mm and 9 mm for both the cases of roughness due to favorable flow dynamics.</dc:description>
	<dc:publisher xml:lang="en">Pandawan</dc:publisher>
	<dc:date>2021-09-08</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://att.aptisi.or.id/index.php/att/article/view/200</dc:identifier>
	<dc:identifier>10.34306/att.v3i2.200</dc:identifier>
	<dc:source xml:lang="en">Aptisi Transactions on Technopreneurship (ATT); Vol. 3 No. 2 (2021): September; 127-143</dc:source>
	<dc:source xml:lang="id">Aptisi Transactions On Technopreneurship (ATT); Vol 3 No 2 (2021): September; 127-143</dc:source>
	<dc:source>2656-8888</dc:source>
	<dc:source>2655-8807</dc:source>
	<dc:source>10.34306/att.v3i2</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://att.aptisi.or.id/index.php/att/article/view/200/148</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2021 Bhanu Pratap  Singh, Vijay Singh  Bisht, Prabhakar  Bhandari, kamal rawat</dc:rights>
	<dc:rights xml:lang="en">https://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>