Melola Discovery

← Melola Discovery

Akses terbuka Jurnal

Risk Assessment, Risk Identification, and Control in The Process Of Steel Smelting Using the Hiradc Method

APTISI Transactions on Management (ATM) · Vol. 7 No. 3 (2023) · hlm. 254–265

DOI
10.33050/atm.v7i3.2142
ISSN
2622-6804, 2622-6812
Terbit
2023-09-27
Penerbit
Pandawan
Bahasa
en
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

Workplace accidents include illnesses brought on by working conditions, accidents on the way to and from work,and other incidents. Steel smelting, an operation that involves melting steel to produce an iron rod (billet), which issubsequently molded into different materials needed, is one of the work environments where accidents can happenwith risks ranging from low to severe. Using the HIRADC approach, work safety can undoubtedly be evaluated.Using a scale based on the potential outcome, this method can identify the risks, dangers, and assessments that mayarise throughout the steel-smelting process. The HIRADC approach will be used in this study to identify risks andgauge the likelihood of accidents in the Indonesian steel smelting process. As a result, 36 dangers with varyinglevels of low, medium, and high risk exist. Various additional safety tools must be owned because Indonesia's levelof safety control is still quite poor

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 134 tautan kepenulisan bersama · 6 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Raharja
  • Satya Wacana Christian University
  • Gunadarma University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Qurotul AiniUniversitas Raharja18
Ninda LutfianiUniversitas Raharja8
Irwan SembiringSatya Wacana Christian University6
Danny ManonggaSatya Wacana Christian University6
Po Abas SunaryaAfiliasi tidak diketahui4
Alfiah KhoirunisaUniversitas Raharja3
Dwi ApriliasariAfiliasi tidak diketahui3
Muhtarom MuhtaromAfiliasi tidak diketahui3
Agung RizkyAfiliasi tidak diketahui3
Sutarto WijonoAfiliasi tidak diketahui3
Shofiyul MillahAfiliasi tidak diketahui3
Desy AprianiAfiliasi tidak diketahui2
Mohamad RakhmansyahAfiliasi tidak diketahui2
Ihsan Nuril HikamAfiliasi tidak diketahui2
Adam FaturahmanAfiliasi tidak diketahui2
Nuke Puji Lestari SantosoUniversitas Raharja2
Natasya Aprila YusufAfiliasi tidak diketahui2
Umi NarimawatiAfiliasi tidak diketahui2
Joko SiswantoAfiliasi tidak diketahui2
Hindriyanto Dwi PurnomoSatya Wacana Christian University2
Alexander WilliamsAfiliasi tidak diketahui1
Sella AvionitaAfiliasi tidak diketahui1
Dini HidayatiAfiliasi tidak diketahui1
Andriyansah AndriyansahAfiliasi tidak diketahui1
Galih Putra CesnaAfiliasi tidak diketahui1
Ahmad Yadi FauziAfiliasi tidak diketahui1
Achmad Benny MutiaraGunadarma University1
Prihandoko PrihandokoGunadarma University1
Charlotte PashaAfiliasi tidak diketahui1
Nur AzizahAfiliasi tidak diketahui1
Muhammad Hasbullah KadimAfiliasi tidak diketahui1
Abdul KadimAfiliasi tidak diketahui1
Muhammad Faizal FazriAfiliasi tidak diketahui1
Nikita IvanovAfiliasi tidak diketahui1
Brigitta CallulaAfiliasi tidak diketahui1
Nur AzizahAfiliasi tidak diketahui1
Raihan RaihanAfiliasi tidak diketahui1
Marviola HardiniAfiliasi tidak diketahui1
Aan KaniviaAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ijc.ilearning.co/ATM/oai, pertama di-harvest 6 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Risk Assessment, Risk Identification, and Control in The Process Of Steel Smelting Using the Hiradc Method</dc:title>
	<dc:creator xml:lang="en">Rahardja, Untung</dc:creator>
	<dc:subject xml:lang="en">smelting steel</dc:subject>
	<dc:subject xml:lang="en">workplace accidents</dc:subject>
	<dc:subject xml:lang="en">HIRADC</dc:subject>
	<dc:description xml:lang="en">Workplace accidents include illnesses brought on by working conditions, accidents on the way to and from work,and other incidents. Steel smelting, an operation that involves melting steel to produce an iron rod (billet), which issubsequently molded into different materials needed, is one of the work environments where accidents can happenwith risks ranging from low to severe. Using the HIRADC approach, work safety can undoubtedly be evaluated.Using a scale based on the potential outcome, this method can identify the risks, dangers, and assessments that mayarise throughout the steel-smelting process. The HIRADC approach will be used in this study to identify risks andgauge the likelihood of accidents in the Indonesian steel smelting process. As a result, 36 dangers with varyinglevels of low, medium, and high risk exist. Various additional safety tools must be owned because Indonesia's levelof safety control is still quite poor</dc:description>
	<dc:publisher xml:lang="en">Pandawan</dc:publisher>
	<dc:date>2023-09-27</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijc.ilearning.co/ATM/article/view/2142</dc:identifier>
	<dc:identifier>10.33050/atm.v7i3.2142</dc:identifier>
	<dc:source xml:lang="en">APTISI Transactions on Management (ATM); Vol. 7 No. 3 (2023): September; 254-265</dc:source>
	<dc:source xml:lang="id">APTISI Transactions on Management (ATM); Vol 7 No 3 (2023): September; 254-265</dc:source>
	<dc:source>2622-6804</dc:source>
	<dc:source>2622-6812</dc:source>
	<dc:source>10.33050/atm.v7i3</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://ijc.ilearning.co/ATM/article/view/2142/778</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2023 Untung Rahardja (Author)</dc:rights>
	<dc:rights xml:lang="en">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>