Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Optimized PID Controller with Bacterial Foraging Algorithm

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 5 No. 6 (2015)

DOI
10.11591/ijece.v5i6.pp1372-1380
ISSN
2088-8708, 2088-8708
Terbit
2015-12-01
Penerbit
Institute of Advanced Engineering and Science
Lisensi
creativecommons.org/licenses/by-nc/4.0

Abstrak

Fish robot precision depends on a variety of factors including the precision of motion sensors, mobility of links, elasticity of fish robot actuators system, and the precision of controllers. Among these factors, precision and efficiency of controllers play a key role in fish robot precision. In the present paper, a robot fish has been designed with dynamics and swimming mechanism of a real fish. According to equations of motion, this fish robot is designed with 3 hinged links. Subsequently, its control system was defined based on the same equations. In this paper, an approach is suggested to control fish robot trajectory using optimized PID controller through Bacterial Foraging algorithm, so as to adjust the gains. Then, this controller is compared to the powerful Fuzzy controller and optimized PID controller through PSO algorithm when applying step and sine inputs. The research findings revealed that optimized PID controller through Bacterial Foraging Algorithm had better performance than other approaches in terms of decreasing of the settling time, reduction of the maximum overshoot and desired steady state error in response to step input. Efficiency of the suggested method has been analyzed by MATLAB software.

Jaringan kolaborasi para penulis

2 penulis · 1 tautan kepenulisan bersama · 1 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Islamic Azad University, Tehran
  • Islamic Azad University, Mashhad
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Data ini berasal dari Crossref (yang disetorkan penerbit), karena endpoint OAI-PMH milik jurnal tidak dapat di-harvest.

Sumber metadata: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, pertama di-harvest 27 Okt 2026, terakhir terlihat 15 Nov 2026.
Metadata sebagai oai_dc, dikonversi dari Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Optimized PID Controller with Bacterial Foraging Algorithm</dc:title><dc:creator>Mirzaei, Seiyed Mohammad</dc:creator><dc:creator>Moattar, Mohammad Hossein</dc:creator><dc:description>&lt;jats:p&gt;&amp;lt;p&amp;gt;&amp;lt;em&amp;gt;Fish robot precision depends on a variety of factors including the precision of motion sensors, mobility of links, elasticity of fish robot actuators system, and the precision of controllers. Among these factors, precision and efficiency of controllers play a key role in fish robot precision.  In the present paper, a robot fish has been designed with dynamics and swimming mechanism of a real fish. According to equations of motion, this fish robot is designed with 3 hinged links. Subsequently, its control system was defined based on the same equations. In this paper, an approach is suggested to control fish robot trajectory using optimized PID controller through Bacterial Foraging algorithm, so as to adjust the gains. Then, this controller is compared to the powerful Fuzzy controller and optimized PID controller through PSO algorithm when applying step and sine inputs. The research findings revealed that optimized PID controller through Bacterial Foraging Algorithm had better performance than other approaches in terms of decreasing of the settling time, reduction of the maximum overshoot and desired steady state error in response to step input. Efficiency of the suggested method has been analyzed by MATLAB software.&amp;lt;/em&amp;gt;&amp;lt;/p&amp;gt;&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2015-12-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v5i6.pp1372-1380</dc:identifier><dc:identifier>10.11591/ijece.v5i6.pp1372-1380</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 5 No 6 (2015); 1372</dc:source><dc:source>2088-8708</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/5761/4491</dc:relation><dc:rights>http://creativecommons.org/licenses/by-nc/4.0</dc:rights></oai_dc:dc>