Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

On the Design and Development of a Zigbee-Based Multimodal Input-Output Monitoring-Actuating System

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 5 No. 5 (2015)

DOI
10.11591/ijece.v5i5.pp1143-1152
ISSN
2088-8708, 2088-8708
Terbit
2015-10-01
Penerbit
Institute of Advanced Engineering and Science
Lisensi
creativecommons.org/licenses/by-nc/4.0

Abstrak

The monitoring of a physically challenged patient’s activities is a crucial and difficult task for the medical professionals. The design and development of a multimodal- input and output wireless system with two sensors and three actuators that can be used for just monitoring or for both monitoring and stimulating are discussed in this research. Touch and tilt sensors at the input part of the system attached to Zigbee modules communicate in a wireless manner with voice, vibration and light actuators connected to Zigbee modules at the output part. The hardware and the software parts are designed and integrated in such a way that a new sensor at the input or a new actuator at the output can be included or excluded based on the needs of the patient. It is shown how to design and develop sensors. In an application programming interface communication mode, 3 XBee series 1 modules send and receive data in a wireless manner. The prototype of the system was tested with promising results in the case of the patients with inattention disorder. This system can be used for monitoring the activities of a patient and also for actuating certain stimulus in the patient side in case of necessity.

Jaringan kolaborasi para penulis

7 penulis · 15 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Fujita Health University
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Genichi TaninoFujita Health University4
Hiroyuki MiyasakaFujita Health University4
Kotaro TakedaFujita Health University4

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Data ini berasal dari Crossref (yang disetorkan penerbit), karena endpoint OAI-PMH milik jurnal tidak dapat di-harvest.

Sumber metadata: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, pertama di-harvest 27 Okt 2026, terakhir terlihat 15 Nov 2026.
Metadata sebagai oai_dc, dikonversi dari Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>On the Design and Development of a Zigbee-Based Multimodal Input-Output Monitoring-Actuating System</dc:title><dc:creator>Orand, Abbas</dc:creator><dc:creator>Tomita, Y.</dc:creator><dc:creator>Okamoto, Sayaka</dc:creator><dc:creator>Sonoda, Shigeru</dc:creator><dc:description>&lt;jats:p&gt;The monitoring of a physically challenged patient’s activities is a crucial and difficult task for the medical professionals. The design and development of a multimodal- input and output wireless system with two sensors and three actuators that can be used for just monitoring or for both monitoring and stimulating are discussed in this research. Touch and tilt sensors at the input part of the system attached to Zigbee modules communicate in a wireless manner with voice, vibration and light actuators connected to Zigbee modules at the output part. The hardware and the software parts are designed and integrated in such a way that a new sensor at the input or a new actuator at the output can be included or excluded based on the needs of the patient. It is shown how to design and develop sensors. In an application programming interface communication mode, 3 XBee series 1 modules send and receive data in a wireless manner. The prototype of the system was tested with promising results in the case of the patients with inattention disorder. This system can be used for monitoring the activities of a patient and also for actuating certain stimulus in the patient side in case of necessity.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2015-10-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v5i5.pp1143-1152</dc:identifier><dc:identifier>10.11591/ijece.v5i5.pp1143-1152</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 5 No 5 (2015); 1143</dc:source><dc:source>2088-8708</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/5736/4613</dc:relation><dc:rights>http://creativecommons.org/licenses/by-nc/4.0</dc:rights></oai_dc:dc>