Melola Discovery

← Melola Discovery

Open access Jurnal SINTA 1

Performance Analysis of Doubly Fed Induction Generator Using Vector Control Technique

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 5 No. 5 (2015)

DOI
10.11591/ijece.v5i5.pp929-938
ISSN
2088-8708, 2088-8708
Published
2015-10-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-nc/4.0

Abstract

There are many solar power and wind stations installed in the power system for environmental and economic reasons. In fact, wind energy is inexpensive and the safetest among all sources of renewable energy, it has been recognized that variable speed wind turbine based on the doubly fed induction generator. It is the most effective with less cost and high power yield. This paper has chosen doubly fed induction generator for a comprehensive study of modelling, performance and analysing. DFIG wind turbine has to operate below and above synchronous speed which requires smooth transition mode change for reliable operation to be controlled to provide stability for the power system. Hence its performance depends on the generator itself and the converter operation and control system. This paper presents completed mathematical model of DFIG with its AC/DC/AC converter driven by DC machine. The rotor is considered fed by a voltage source converter whereas the stator is connected to the grid directly. The capacity of the wind power generation is 1.5MW. The voltage rating and frequency for this system are 575V, 50Hz.This paper show detailed model of DFIG.

Collaboration network of the authors

2 authors · 1 co-authorship link

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Mandalay Technological University
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Okt 2026, last seen 1 Nov 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Performance Analysis of Doubly Fed Induction Generator Using Vector Control Technique</dc:title><dc:creator>Thin, Aye Myat</dc:creator><dc:creator>Yuzana Kyaing, Nang Saw</dc:creator><dc:description>&lt;jats:p&gt;There are many solar power and wind stations installed in the power system for environmental and economic reasons. In fact, wind energy is inexpensive and the safetest among all sources of renewable energy, it has been recognized that variable speed wind turbine based on the doubly fed induction generator. It is the most effective with less cost and high power yield. This paper has chosen doubly fed induction generator for a comprehensive study of modelling, performance and analysing. DFIG wind turbine has to operate below and above synchronous speed which requires smooth transition mode change for reliable operation to be controlled to provide stability for the power system. Hence its performance depends on the generator itself and the converter operation and control system. This paper presents completed mathematical model of DFIG with its AC/DC/AC converter driven by DC machine. The rotor is considered fed by a voltage source converter whereas the stator is connected to the grid directly. The capacity of the wind power generation is 1.5MW. The voltage rating and frequency for this system are 575V, 50Hz .This paper show detailed model of DFIG.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2015-10-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v5i5.pp929-938</dc:identifier><dc:identifier>10.11591/ijece.v5i5.pp929-938</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 5 No 5 (2015); 929</dc:source><dc:source>2088-8708</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/5712/4535</dc:relation><dc:rights>http://creativecommons.org/licenses/by-nc/4.0</dc:rights></oai_dc:dc>