Melola Discovery

← Melola Discovery

Open access Jurnal SINTA 1

Design and Analysis High Gain PHEMT LNA for Wireless Application at 5.8 GHz

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 5 No. 3 (2015)

DOI
10.11591/ijece.v5i3.pp611-620
ISSN
2088-8708, 2088-8708
Published
2015-06-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-nc/4.0

Abstract

This research present a design of a higher gain (66.38dB) for PHEMT LNA using an inductive drain feedback technique for wireless application at 5.8GHz. The amplifier it is implemented using PHEMT FHX76LP transistor devices. The designed circuit is simulated with Ansoft Designer SV. The LNA was designed using T-network as a matching technique was used at the input and output terminal, inductive generation to the source and an inductive drain feedback. The low noise amplifier (LNA) using lumped-component provides a noise figure 0.64 dB and a gain (S 21 ) of 68.94 dB. The output reflection (S 22 ), input reflection (S 11 ) and return loss (S 12 ) are -17.37 dB, -15.77 dB and -88.39 dB respectively. The measurement shows the stability was at 4.54 and 3-dB bandwidth of 1.72 GHz. While, the low noise amplifier (LNA) using Murata manufactured component provides a noise figure 0.60 dB and a gain (S 21 ) of 66.38 dB. The output reflection (S 22 ), input reflection (S 11 ) and return loss (S 12 ) are -13.88 dB, -12.41 dB and -89.90 dB respectively. The measurement shows the stability was at 6.81 and 3-dB bandwidth of 1.70 GHz. The input sensitivity more than -80 dBm exceeded the standards required by IEEE 802.16.

Collaboration network of the authors

35 authors · 103 co-authorship links · 22 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universiti Teknikal Malaysia Melaka
  • National University of Malaysia
  • Majlis Amanah Rakyat
  • Sultan Idris Education University
  • Universiti of Malaysia Sabah
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Noor Azwan ShairiUniversiti Teknikal Malaysia Melaka4
M. S. M. IsaUniversiti Teknikal Malaysia Melaka4
Muhannad Kaml AbdulhameedUniversiti Teknikal Malaysia Melaka4
Mothana Lafta AttiahUniversiti Teknikal Malaysia Melaka4
Mowafak Khadom MohsenUniversiti Teknikal Malaysia Melaka3
Imran Mohd IbrahimUniversiti Teknikal Malaysia Melaka3
A. A. M. IsaUniversiti Teknikal Malaysia Melaka3
M. Y. AlgumaeiUniversiti Teknikal Malaysia Melaka2
Abdullah Mohammed Saghir ZobilahUniversiti Teknikal Malaysia Melaka2
Badrul Hisham AhmadUniversiti Teknikal Malaysia Melaka2
Sameer AlaniUniversiti Teknikal Malaysia Melaka2
Abu Bakar IbrahimSultan Idris Education University1
Mohd Nor HusainAffiliation unknown1
Mohammad Syahrir JohalAffiliation unknown1
Muhamad Amin Hakim SazaliUniversiti Teknikal Malaysia Melaka1
Mahamod B. IsmailNational University of Malaysia1
Rosdiadee NordinNational University of Malaysia1
Nor Fadzilah AbdullahNational University of Malaysia1
Mussa MabrokUniversiti Teknikal Malaysia Melaka1
Nasrullah SaifullahUniversiti Teknikal Malaysia Melaka1
Mowafak K. MohsinUniversiti Teknikal Malaysia Melaka1
Ahmed Musa DinarUniversiti Teknikal Malaysia Melaka1
Nursyahirah Mohd SanusiUniversiti Teknikal Malaysia Melaka1
Adib OthmanUniversiti Teknikal Malaysia Melaka1
Herwansyah LagoUniversiti of Malaysia Sabah1
Ahmad AhmadUniversiti Teknikal Malaysia Melaka1
Harriman RazmanAffiliation unknown1
Mohd Azizi ChikAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Okt 2026, last seen 27 Okt 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Design and  Analysis  High Gain PHEMT LNA  for Wireless Application at  5.8 GHz</dc:title><dc:creator>Pongot, Kamil</dc:creator><dc:creator>Othman, Abdul Rani</dc:creator><dc:creator>Zakaria, Zahriladha</dc:creator><dc:creator>Suaidi, Mohamad Kadim</dc:creator><dc:creator>Hamidon, Abdul Hamid</dc:creator><dc:creator>Hamidon, J.S.</dc:creator><dc:creator>Ahmad, Azman</dc:creator><dc:description>&lt;jats:p&gt;This research present a design of a higher  gain (66.38dB) for PHEMT LNA  using an inductive drain feedback technique for wireless application at 5.8GHz. The amplifier it is implemented using PHEMT FHX76LP transistor devices.  The designed circuit is simulated with  Ansoft Designer SV.  The LNA was designed using  T-network as a matching technique was used at the input and output terminal,  inductive generation to the source and an inductive drain feedback. The  low noise amplifier (LNA) using lumped-component provides a noise figure 0.64 dB and a gain (S&amp;lt;sub&amp;gt;21&amp;lt;/sub&amp;gt;) of 68.94 dB. The output reflection (S&amp;lt;sub&amp;gt;22&amp;lt;/sub&amp;gt;), input reflection (S&amp;lt;sub&amp;gt;11&amp;lt;/sub&amp;gt;) and return loss (S&amp;lt;sub&amp;gt;12&amp;lt;/sub&amp;gt;) are -17.37 dB, -15.77 dB and -88.39 dB respectively. The measurement shows the  stability was at  4.54 and 3-dB bandwidth of 1.72 GHz. While, the  low noise amplifier (LNA) using  Murata manufactured component provides a noise figure 0.60 dB and a gain (S&amp;lt;sub&amp;gt;21&amp;lt;/sub&amp;gt;) of 66.38 dB. The output reflection (S&amp;lt;sub&amp;gt;22&amp;lt;/sub&amp;gt;), input reflection (S&amp;lt;sub&amp;gt;11&amp;lt;/sub&amp;gt;) and return loss (S&amp;lt;sub&amp;gt;12&amp;lt;/sub&amp;gt;) are -13.88 dB, -12.41 dB and -89.90 dB respectively. The measurement shows the  stability was at  6.81 and 3-dB bandwidth of 1.70 GHz. The input sensitivity more than -80 dBm  exceeded the standards required by IEEE 802.16.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2015-06-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v5i3.pp611-620</dc:identifier><dc:identifier>10.11591/ijece.v5i3.pp611-620</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 5 No 3 (2015); 611</dc:source><dc:source>2088-8708</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/5655/4678</dc:relation><dc:rights>http://creativecommons.org/licenses/by-nc/4.0</dc:rights></oai_dc:dc>