Melola Discovery

← Melola Discovery

Open access Jurnal SINTA 1

Parameter estimation of three-phase linear induction motor by a DSP-based electric-drives system

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 10 No. 1 (2020)

DOI
10.11591/ijece.v10i1.pp626-636
ISSN
2088-8708, 2088-8708
Published
2020-02-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-nc/4.0

Abstract

This work describes a method to characterize a three-phase linear induction motor in order to determine the various parameters used in its per-phase equivalent circuit by a DSP-based electric-drives system. In LIM (Linear Induction Motor), the air gap is very large compared with the RIMs (Rotary Induction Motors). Further, the secondary part normally does not have slotted structure. It is just made of aluminum and steel plates. Therefore, the effective air gap is larger than the physical air gap. High air gap makes a larger leakage inductance. It leads to lower efficiency and lower power factor. DC resistance test will be done to determine the value of Rs. The primary Inductance Ls will be calculated by running the LIM at synchronous speed. The secondary parameters i.e. Llr and Rr′ will be calculated by blocked-mover test. The experiment for no load test is shown and include a DC motor coupled to the LIM under test. Two methods to calculate the secondary parameters are described.

Collaboration network of the authors

40 authors · 83 co-authorship links · 42 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universidad Nacional de Colombia
  • Universidad Católica de Manizales
  • Tecnológico de Antioquia
  • Universidad de Caldas
  • Universidad del Magdalena
  • Institución Universitaria Pascual Bravo
  • National Research Council
  • Other organisations
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
John Edwin Candelo-BecerraUniversidad Nacional de Colombia7
Vladimir Henao-CéspedesUniversidad Católica de Manizales6
Alejandro RincónUniversidad Católica de Manizales3
Paula Andrea López JimenezUniversidad Católica de Manizales3
Gloria Yaneth Flórez YépesUniversidad Católica de Manizales2
Odair Augusto Trujillo OrozcoUniversidad Nacional de Colombia2
Rubén Darío Lara-EscobarUniversidad Católica de Manizales2
José Israel Cardenas-JimenezUniversidad Nacional de Colombia2
Carlos-Augusto González-CorreaUniversidad de Caldas2
Clara Helena González-CorreaUniversidad de Caldas2
John Alexander TabordaUniversidad del Magdalena1
Fabiola AnguloAffiliation unknown1
Héctor A. Tabares-OspinaInstitución Universitaria Pascual Bravo1
Mauricio García VargasUniversidad Nacional de Colombia1
Carlos Ildefonso Hoyos VelascoNational Research Council1
Luis Gabriel Lafaurie PonceUniversidad Nacional de Colombia1
Sergio Andrés Pizarro PérezAffiliation unknown1
Aquiles J. MoreloUniversidad Nacional de Colombia1
Simeón Casanova TrujilloUniversidad Nacional de Colombia1
Susana V. AwadUniversidad Nacional de Colombia1
Joaquin F OrozcoUniversidad Nacional de Colombia1
Gonzalo M AriasTecnológico de Antioquia1
Pablo PeláezTecnológico de Antioquia1
LUIS FERNANDO DIAZ CADAVIDUniversidad Nacional de Colombia1
Angie Marcela Galvez ValenciaAffiliation unknown1
Erwin Leandro Lemus RodriguezAffiliation unknown1
Miguel Andres Arango ArgotiAffiliation unknown1
Eder Alexander Molina ViloriaTecnológico de Antioquia1
Juan Carlos Granobles ToresUniversidad de Manizales1
María Nancy Marín OlayaUniversidad Católica de Manizales1
Jesús Emilio Pinto LoperaUniversidad de la Amazonia1
Diana Carolina Meneses-CabezasUniversidad Católica de Manizales1
Yuliana Zapata-SernaUniversidad Católica de Manizales1
Jose Manuel Monsalve-TellezUniversidad Católica de Manizales1
Jorge Luís Torres-LeónNigerian Institute For Oil Palm Reasearch1
Christian Javier Pinza-JiménezUniversidad Católica de Manizales1
Astrid Lorena Urbano-CanoUniversidad del Cauca1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Okt 2026, last seen 27 Okt 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Parameter estimation of three-phase linear induction motor by a DSP-based electric-drives system</dc:title><dc:creator>Toro García, Nicolás</dc:creator><dc:creator>Garcés Gómez, Yeison Alberto</dc:creator><dc:creator>Hoyos Velasco, Fredy Edimer</dc:creator><dc:description>&lt;jats:p&gt;This work describes a method to characterize a three-phase linear induction motor in order to determine the various parameters used in its per-phase equivalent circuit by a DSP-based electric-drives system. In LIM (Linear Induction Motor), the air gap is very large compared with the RIMs (Rotary Induction Motors). Further, the secondary part normally does not have slotted structure. It is just made of aluminum and steel plates. Therefore, the effective air gap is larger than the physical air gap. High air gap makes a larger leakage inductance. It leads to lower efficiency and lower power factor.  DC resistance test will be done to determine the value of Rs. The primary Inductance Ls will be calculated by running the LIM at synchronous speed. The secondary parameters i.e. Llr and Rr′ will be calculated by blocked-mover test. The experiment for no load test is shown and include a DC motor coupled to the LIM under test. Two methods to calculate the secondary parameters are described.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2020-02-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v10i1.pp626-636</dc:identifier><dc:identifier>10.11591/ijece.v10i1.pp626-636</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 10 No 1 (2020); 626</dc:source><dc:source>2088-8708</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/19932/pdf</dc:relation><dc:rights>http://creativecommons.org/licenses/by-nc/4.0</dc:rights></oai_dc:dc>