Melola Discovery

← Melola Discovery

Open access Jurnal SINTA 1

A mitigation of channel crosstalk effect in dispersion shifted fiber based on durability of modulation technique

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 10 No. 1 (2020)

DOI
10.11591/ijece.v10i1.pp891-899
ISSN
2088-8708, 2088-8708
Published
2020-02-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-nc/4.0

Abstract

In fiber optics the Four Wave Mixing (FWM) has the harmful effect of an optical transmission system that can severely limit Wavelength Division Multiplexing (WDM) and reduce the transmission aptness. This work preset the durability of the different modulation format was tested to FWM by using Dispersion Shifted Fiber (DSF). Moreover, the performance of the proposed system is surveyed by changing the fiber length and applying an information rate of 200 Gb/s. The experimental results show that the FWM capacity has decreased significantly by more than 14 dB when applying Return to Zero (RZ) modulation form. In addition, in terms of the propsed system performance in the first channel and with 700 km distance, it was observed that the lower Bit Error Rate (BER) in the normal RZ modulation is equal to 1.3×10-13. As well as it is noticeable when applied the Non Return to Zero (NRZ), the Modified Duobinary Return to Zero (MDRZ) and Gaussian modulation, the system performance will be quickly changed and getting worse, where the BERs increased to 1.3×10-4, 1.3×10-6 and 1.3×10-2 consecutively at same channel and for the same parameters.

Collaboration network of the authors

11 authors · 18 co-authorship links · 1 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • University of Babylon
  • University of Diyala
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Abdulrasul A. Al-hayderUniversity of Babylon2
Ahmed Samawi GhthwanUniversity of Babylon1
Ahmed Samawi AlkhafajiUniversity of Babylon1
Ehab AbdulRazzaq HusseinUniversity of Babylon1
Hilal Abbood Al-LibawyUniversity of Babylon1
Ahmad S. AbdullahUniversity of Diyala1
Muhammed Salah Sadiq AlkafajiAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Okt 2026, last seen 27 Okt 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>A mitigation of channel crosstalk effect in dispersion shifted fiber based on durability of modulation technique</dc:title><dc:creator>Shaban, Ali</dc:creator><dc:creator>Abed, Murad Obaid</dc:creator><dc:creator>Hussein, Ehab Abdul Razzaq</dc:creator><dc:creator>Abd, H. J.</dc:creator><dc:description>&lt;jats:p&gt;In fiber optics the Four Wave Mixing (FWM) has the harmful effect of an optical transmission system that can severely limit Wavelength Division Multiplexing (WDM) and reduce the transmission aptness. This work preset the durability of the different modulation format was tested to FWM by using Dispersion Shifted Fiber (DSF). Moreover, the performance of the proposed system is surveyed by changing the fiber length and applying an information rate of 200 Gb/s. The experimental results show that the FWM capacity has decreased significantly by more than 14 dB when applying Return to Zero (RZ) modulation form. In addition, in terms of the propsed system performance in the first channel and with 700 km distance, it was observed that the lower Bit Error Rate (BER) in the normal RZ modulation is equal to 1.3×10-13. As well as it is noticeable when applied the Non Return to Zero (NRZ), the Modified Duobinary Return to Zero (MDRZ) and Gaussian modulation, the system performance will be quickly changed and getting worse, where the BERs  increased to 1.3×10-4, 1.3×10-6 and 1.3×10-2 consecutively at same channel and for the same parameters.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2020-02-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v10i1.pp891-899</dc:identifier><dc:identifier>10.11591/ijece.v10i1.pp891-899</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 10 No 1 (2020); 891</dc:source><dc:source>2088-8708</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/19215/pdf</dc:relation><dc:rights>http://creativecommons.org/licenses/by-nc/4.0</dc:rights></oai_dc:dc>