Melola Discovery

← Melola Discovery

Open access Jurnal SINTA 1

Analysis of fuzzy logic controller based bi-directional DC-DC converter for battery energy management in hybrid solar/wind micro grid system

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 10 No. 3 (2020)

DOI
10.11591/ijece.v10i3.pp2271-2284
ISSN
2088-8708, 2088-8708
Published
2020-06-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-nc/4.0

Abstract

This paper proposes a fuzzy logic-based battery energy management system in hybrid renewable system. The novel topology consists of solar and wind energy system-based input sources and a battery bank to store the energy when in excess. The PV-Wind source is equipped with unidirectional boost converter whereas, the battery storage system is connected to the system with a bi-directional DC/DC converter. The main novelty of this research is the fuzzy logic-based battery management system which charges and discharges into the DC bus system based on the supply-load demand. The fuzzy logic controller (FLC) based maximum power point tracking (MPPT) is used in the PV and wind energy conversion system (WECS) to track the maximum available power for the different irradiance and wind velocity respectively. The obtained results are compared to conventional P&O MPPT control algorithm to find the effectiveness of the system. A 500 W PV system and a 500 W Permanent magnet synchronous generator (PMSG) based WECS is implemented for its simplicity and high efficiency. The proposed control topology is designed and tested using MATLAB/Simulink

Collaboration network of the authors

4 authors · 4 co-authorship links

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Acharya Nagarjuna University
  • Jawaharlal Nehru Technological University Anantapur
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
N. ChaitanyaAffiliation unknown1
P. SujathaJawaharlal Nehru Technological University Anantapur1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Okt 2026, last seen 27 Okt 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Analysis of fuzzy logic controller based bi-directional DC-DC converter for battery energy management in hybrid solar/wind micro grid system</dc:title><dc:creator>Nagaiah, M.</dc:creator><dc:creator>Sekhar, K. Chandra</dc:creator><dc:description>&lt;jats:p&gt;This paper proposes a fuzzy logic-based battery energy management system in hybrid renewable system. The novel topology consists of solar and wind energy system-based input sources and a battery bank to store the energy when in excess. The PV-Wind source is equipped with unidirectional boost converter whereas, the battery storage system is connected to the system with a bi-directional DC/DC converter. The main novelty of this research is the fuzzy logic-based battery management system which charges and discharges into the DC bus system based on the supply-load demand. The fuzzy logic controller (FLC) based maximum power point tracking (MPPT) is used in the PV and wind energy conversion system (WECS) to track the maximum available power for the different irradiance and wind velocity respectively. The obtained results are compared to conventional P&amp;amp;O MPPT control algorithm to find the effectiveness of the system. A 500 W PV system and a 500 W Permanent magnet synchronous generator (PMSG) based WECS is implemented for its simplicity and high efficiency. The proposed control topology is designed and tested using MATLAB/Simulink&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2020-06-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v10i3.pp2271-2284</dc:identifier><dc:identifier>10.11591/ijece.v10i3.pp2271-2284</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 10 No 3 (2020); 2271</dc:source><dc:source>2088-8708</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/21028/pdf</dc:relation><dc:rights>http://creativecommons.org/licenses/by-nc/4.0</dc:rights></oai_dc:dc>