Melola Discovery

← Melola Discovery

Open access Jurnal SINTA 1

Torque estimator using MPPT method for wind turbines

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 10 No. 2 (2020)

DOI
10.11591/ijece.v10i2.pp1208-1219
ISSN
2088-8708, 2088-8708
Published
2020-04-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-nc/4.0

Abstract

In this work, we presents a control scheme of the interface of a grid connected Variable Speed Wind Energy Generation System based on Doubly Fed Induction Generator (DFIG). The vectorial strategy for oriented stator flux GADA has been developed To extract the maximum power MPPT from the wind turbine. It uses a second order sliding mode controller and Kalman observer, using the super twisting algorithm. The simulation describes the effectiveness of the control strategy adopted.For A step and random profiles of the wind speed, reveals better tracking and perfect convergence of electromagnetic torque and concellation of reactive power to the stator. This control limits the mechanical stress on the tansmission shaft, improves the quality of the currents generated on the grid and optimizes the efficiency of the conversion chain.

Collaboration network of the authors

17 authors · 27 co-authorship links · 13 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Université Moulay Ismail de Meknes
  • Université Sultan Moulay Slimane
  • Mohammed V University
  • Université Ibn-Tofail
  • Abdelmalek Essaâdi University
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Zineb MekriniUniversité Moulay Ismail de Meknes3
Soufiane OukiliUniversité Moulay Ismail de Meknes2
Adil SaadiUniversité Moulay Ismail de Meknes2
Mohammed Amine IhedraneUniversité Moulay Ismail de Meknes1
El Fadl AdibaUniversité Ibn-Tofail1
Nejwa El MaammarUniversité Moulay Ismail de Meknes1
Jaouad FoshiUniversité Moulay Ismail de Meknes1
Asmae BabayaUniversité Moulay Ismail de Meknes1
Lahbib ZenkouarMohammed V University1
Mohammed LahsainiUniversité Moulay Ismail de Meknes1
Aziz El FatimiMohammed V University1
Ibrahime Hassan NejdiUniversité Sultan Moulay Slimane1
Youssef RhaziUniversité Sultan Moulay Slimane1
Mustapha Ait LafkihUniversité Sultan Moulay Slimane1
Mohammed LamsalliAbdelmalek Essaâdi University1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Okt 2026, last seen 27 Okt 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Torque estimator using MPPT method for wind turbines</dc:title><dc:creator>Baala, Youssef</dc:creator><dc:creator>Bri, Seddik</dc:creator><dc:description>&lt;jats:p&gt;In this work, we presents a control scheme of the interface of a grid connected Variable Speed Wind Energy Generation System based on Doubly Fed Induction Generator (DFIG). The vectorial strategy for oriented stator flux GADA has been developed To extract the maximum power MPPT from the wind turbine. It uses a second order sliding mode controller and Kalman observer, using the super twisting algorithm. The simulation describes the effectiveness of the control strategy adopted.For A step and random profiles of the wind speed, reveals better tracking and perfect convergence of electromagnetic torque and concellation of reactive power to the stator. This control limits the mechanical stress on the tansmission shaft, improves the quality of the currents generated on the grid and optimizes the efficiency of the conversion chain.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2020-04-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v10i2.pp1208-1219</dc:identifier><dc:identifier>10.11591/ijece.v10i2.pp1208-1219</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 10 No 2 (2020); 1208</dc:source><dc:source>2088-8708</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/15785/pdf</dc:relation><dc:rights>http://creativecommons.org/licenses/by-nc/4.0</dc:rights></oai_dc:dc>