Melola Discovery

← Melola Discovery

Jurnal

The Effect of Stroke Up and Bore Up on The Performance of Honda Verza Motorcycle

Jurnal Inovasi Mesin · Vol. 6 No. 1 (2024) · hlm. 44–49

DOI
10.15294/jim.v6i1.11178
ISSN
2746-7694
Terbit
2024-04-20
Penerbit
Universitas Negeri Semarang
Bahasa
eng

Abstrak

Many young people make bore up and stroke up modifications to improve the performance of their motorbike engines. which is used for daily activities and racing contests. Apart from that, this modification is necessary for some people, especially men, because most of the people in Juwana work as farmers in fish ponds. Apart from that, the condition of the roads in the pond is still dirt, which makes the roads muddy when it rains. Because motorbikes are used to transport fish harvests and as transportation, their motorbikes also require more power. This research uses an experimental research design by changing the stroke length and piston diameter on a Honda Verza motorbike with variations of Stroke Up, Bore Up and Stroke Up Bore Up. With testing steps using a dynotest 3 times on each motorbike variation to determine the performance of the Honda Verza motorbike. The results of this research show an increase in torque and power produced after modifying the stroke up and bore up. The resulting modification of increasing the piston diameter (bore up) affects the torque and power values produced by the Honda Verza motorbike. The torque value increased by 1.34% at 10,000 rpm and the power value increased by 1.39% at 13,000 rpm. Meanwhile, the stroke up variation affected the power and torque produced by the Honda Verza motorbike. The results obtained from testing the stroke up engine experienced an increase in torque value of 1.36% at 11000 rpm and the power produced increased by 3.16% at 13000 rpm

Kata kunci

Jaringan kolaborasi para penulis

23 penulis · 62 tautan kepenulisan bersama · 8 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • State University of Semarang
  • Sebelas Maret University
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Sonika MaulanaState University of Semarang3
Sudiyono SudiyonoSebelas Maret University2
muhammad riyadi muhammad riyadiState University of Semarang1
Burhan Rubai WijayaState University of Semarang1
Ahmad RoziqinState University of Semarang1
Muhammad Khilmi MubarokState University of Semarang1
Lelu Dina ApristiaState University of Semarang1
Mohammad Burhan Rubai WijayaState University of Semarang1
Rizqi Fitri NaryantoState University of Semarang1
Jeri JuliyonoState University of Semarang1
M. Burhan Rubai WijayaState University of Semarang1
Widi WidayatState University of Semarang1
Ramelan RamelanState University of Semarang1
Muhammad Nur Fachry AState University of Semarang1
Wakhid Muhlisin HidayatState University of Semarang1
Febrian Arif B.State University of Semarang1
Ayub Budhi A.State University of Semarang1
Febrian Arif BudimanState University of Semarang1
Ari Dwi Nur Indriawan MusyonoState University of Semarang1
Winarno Dwi RahardjoState University of Semarang1
Wahyu Ady Priyo KuncahyoState University of Semarang1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unnes.ac.id/journals/jim/oai, pertama di-harvest 6 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">The Effect of Stroke Up and Bore Up on The Performance of Honda Verza Motorcycle</dc:title>
	<dc:creator xml:lang="en">damayanti, lydia </dc:creator>
	<dc:creator xml:lang="en">Septiyanto, Angga</dc:creator>
	<dc:subject xml:lang="en">Honda Verza Motorcycle</dc:subject>
	<dc:subject xml:lang="en">Stroke Up</dc:subject>
	<dc:subject xml:lang="en">Bore Up </dc:subject>
	<dc:subject xml:lang="en">Torque and Power</dc:subject>
	<dc:subject xml:lang="en"> Performance</dc:subject>
	<dc:description xml:lang="en">Many young people make bore up and stroke up modifications to improve the performance of their motorbike engines. which is used for daily activities and racing contests. Apart from that, this modification is necessary for some people, especially men, because most of the people in Juwana work as farmers in fish ponds. Apart from that, the condition of the roads in the pond is still dirt, which makes the roads muddy when it rains. Because motorbikes are used to transport fish harvests and as transportation, their motorbikes also require more power. This research uses an experimental research design by changing the stroke length and piston diameter on a Honda Verza motorbike with variations of Stroke Up, Bore Up and Stroke Up Bore Up. With testing steps using a dynotest 3 times on each motorbike variation to determine the performance of the Honda Verza motorbike. The results of this research show an increase in torque and power produced after modifying the stroke up and bore up. The resulting modification of increasing the piston diameter (bore up) affects the torque and power values produced by the Honda Verza motorbike. The torque value increased by 1.34% at 10,000 rpm and the power value increased by 1.39% at 13,000 rpm. Meanwhile, the stroke up variation affected the power and torque produced by the Honda Verza motorbike. The results obtained from testing the stroke up engine experienced an increase in torque value of 1.36% at 11000 rpm and the power produced increased by 3.16% at 13000 rpm</dc:description>
	<dc:publisher xml:lang="en">Universitas Negeri Semarang</dc:publisher>
	<dc:date>2024-04-20</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unnes.ac.id/journals/jim/article/view/11178</dc:identifier>
	<dc:identifier>10.15294/jim.v6i1.11178</dc:identifier>
	<dc:source xml:lang="en">Jurnal Inovasi Mesin; Vol. 6 No. 1 (2024): APRIL 2024; 44-49</dc:source>
	<dc:source>2746-7694</dc:source>
	<dc:source>10.15294/jim.v6i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.unnes.ac.id/journals/jim/article/view/11178/3910</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2025 Jurnal Inovasi Mesin</dc:rights>
</oai_dc:dc>