Melola Discovery

← Melola Discovery

Jurnal

Design Analysis Pillowblock Strength of Rotogravure Gearbox Uses Catia V5 Software

Jurnal Inovasi Mesin · Vol. 6 No. 2 (2024) · hlm. 1–17

DOI
10.15294/jim.v6i2.11487
ISSN
2746-7694
Terbit
2024-10-25
Penerbit
Universitas Negeri Semarang
Bahasa
eng

Abstrak

The pillowblock has not been tested to determine the von Mises stress, displacement and safety factor values. The aim of this research is to analyze the results of the Pillowblock design analysis using the finite element method using CATIA V5 software.The research method used in this research is an experimental method. In this study, the independent variable used was variations in the thickness dimensions of the Rotogrvure Pillowblock Gearbox. The variations used are Pillowblock Close 1 with varying thicknesses (5 mm, 4 mm, 6 mm, 7 mm), Pillowblock Close 2 with varying thicknesses (6 mm, 5 mm, 7 mm, 8 mm) and Pillowblock Equipment with varying thicknesses (5 mm, 4 mm, 6 mm, 7 mm), the material used is ST 40 with a rotary bending load (bearing load). Tests were carried out using the fenite element method (FEM) to determine the value of von Mises stress, displacement and safety factor. The analysis results show that variations in pillowblock thickness have a high level of effectiveness and efficiency and have a safety factor value of ≥ 2, found in the Pillowblock Close 1 T4 (7 mm) with a von Mises stress value of 0.349 MPa, displacement 0.000046 mm, safety factor 787.96. Pillowblock Close 2 R4 (8 mm) with a von Mises stress value of 0.430 MPa, displacement 0.000062 mm, safety factor 639.24, and Pillowblock Equipment P4 (7 mm) with a von Mises stress value of 2.504 MPa, displacement 0.000312, safety factor 109.82.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 82 tautan kepenulisan bersama · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Muslim Indonesia
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Wirawan SumbodoAfiliasi tidak diketahui2
Rodiansono RodiansonoAfiliasi tidak diketahui2
KriswantoAfiliasi tidak diketahui1
Muhammad Wifaqurrokhman AbdissalamAfiliasi tidak diketahui1
Ari Dwi Nur Indriawan MusyonoAfiliasi tidak diketahui1
Ade Evriansyah LubisAfiliasi tidak diketahui1
Ramadan GintingAfiliasi tidak diketahui1
Mawardinur MawardinurAfiliasi tidak diketahui1
Dinni Khairiah SipayungAfiliasi tidak diketahui1
Devi Catur WinataAfiliasi tidak diketahui1
Muhammad SyalehAfiliasi tidak diketahui1
M.Or, MawardinurAfiliasi tidak diketahui1
Pedo Manta KeliatAfiliasi tidak diketahui1
Boby HelmiAfiliasi tidak diketahui1
Rinaldi AdityaAfiliasi tidak diketahui1
Yitiman TelaumbanuaAfiliasi tidak diketahui1
Hardodi SihombingAfiliasi tidak diketahui1
Anjar KustantoroAfiliasi tidak diketahui1
Soesanto -Afiliasi tidak diketahui1
Kukuh AndriyanAfiliasi tidak diketahui1
Abdurrahman AbdurrahmanAfiliasi tidak diketahui1
Firman MaulanaAfiliasi tidak diketahui1
Suwahyo SuwahyoAfiliasi tidak diketahui1
Rahmat Doni WidodoAfiliasi tidak diketahui1
Fepbri Dwi UtomoAfiliasi tidak diketahui1
Kriswanto KriswantoAfiliasi tidak diketahui1
Anwar RosandiAfiliasi tidak diketahui1
Amalia HasnawatiAfiliasi tidak diketahui1
Arsi Ciptaning TyasAfiliasi tidak diketahui1
Risky Aji Yudha WiratamaAfiliasi tidak diketahui1
Aldi Fahrur RahmandaAfiliasi tidak diketahui1
Abdurrahman AbdurrahmanAfiliasi tidak diketahui1
Sulastri SulastriUniversitas Muslim Indonesia1
Oman SukmanaAfiliasi tidak diketahui1
Rila Rahma AprianiAfiliasi tidak diketahui1
Dewi Erika AdrianiAfiliasi tidak diketahui1
Joko PurnomoAfiliasi tidak diketahui1
Audrey AmeliaAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unnes.ac.id/journals/jim/oai, pertama di-harvest 6 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Design Analysis Pillowblock Strength of Rotogravure Gearbox Uses Catia V5 Software</dc:title>
	<dc:creator xml:lang="en">Agung Nugroho</dc:creator>
	<dc:creator xml:lang="en">Yudiono, Heri</dc:creator>
	<dc:subject xml:lang="en">CATIA V5 </dc:subject>
	<dc:subject xml:lang="en">von Mises stress </dc:subject>
	<dc:subject xml:lang="en">displacement </dc:subject>
	<dc:subject xml:lang="en">safety factor</dc:subject>
	<dc:description xml:lang="en">The pillowblock has not been tested to determine the von Mises stress, displacement and safety factor values. The aim of this research is to analyze the results of the Pillowblock design analysis using the finite element method using CATIA V5 software.The research method used in this research is an experimental method. In this study, the independent variable used was variations in the thickness dimensions of the Rotogrvure Pillowblock Gearbox. The variations used are Pillowblock Close 1 with varying thicknesses (5 mm, 4 mm, 6 mm, 7 mm), Pillowblock Close 2 with varying thicknesses (6 mm, 5 mm, 7 mm, 8 mm) and Pillowblock Equipment with varying thicknesses (5 mm, 4 mm, 6 mm, 7 mm), the material used is ST 40 with a rotary bending load (bearing load). Tests were carried out using the fenite element method (FEM) to determine the value of von Mises stress, displacement and safety factor. The analysis results show that variations in pillowblock thickness have a high level of effectiveness and efficiency and have a safety factor value of ≥ 2, found in the Pillowblock Close 1 T4 (7 mm) with a von Mises stress value of 0.349 MPa, displacement 0.000046 mm, safety factor 787.96. Pillowblock Close 2 R4 (8 mm) with a von Mises stress value of 0.430 MPa, displacement 0.000062 mm, safety factor 639.24, and Pillowblock Equipment P4 (7 mm) with a von Mises stress value of 2.504 MPa, displacement 0.000312, safety factor 109.82.</dc:description>
	<dc:publisher xml:lang="en">Universitas Negeri Semarang</dc:publisher>
	<dc:date>2024-10-25</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unnes.ac.id/journals/jim/article/view/11487</dc:identifier>
	<dc:identifier>10.15294/jim.v6i2.11487</dc:identifier>
	<dc:source xml:lang="en">Jurnal Inovasi Mesin; Vol. 6 No. 2 (2024): OCTOBER 2024; 1-17</dc:source>
	<dc:source>2746-7694</dc:source>
	<dc:source>10.15294/jim.v6i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.unnes.ac.id/journals/jim/article/view/11487/3911</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2025 Jurnal Inovasi Mesin</dc:rights>
</oai_dc:dc>