Melola Discovery

← Melola Discovery

Jurnal

Design and Validation of Horizontal Steam Retort with Capacity of 100 kg Presto milkfish Using Finite Element Method (FEM)

Jurnal Inovasi Mesin · Vol. 6 No. 2 (2024) · hlm. 18–24

DOI
10.15294/jim.v6i2.12160
ISSN
2746-7694
Terbit
2024-10-25
Penerbit
Universitas Negeri Semarang
Bahasa
eng

Abstrak

Retorts are used in the food processing industry to sterilize packaged food products. Sterilization of presto milkfish using retort is done at 120℃ and 2 bar pressure. The retort is designed to work safely under these load conditions. This study aims to determine the safety quality of the horizontal steam retort design. Design validation is done by static analysis using finite element method (FEM) with Solidworks software. The retort design uses 18Cr-8Ni type 304 stainless steel material, with a sterilization load of 120℃ temperature, 2 bar pressure, and 100 kg of milkfish load. The analysis showed that the most considerable Von-Mises stress occurred on the torispherical head with a value of. The largest displacement occurs at the torispherical head of the retort door with a value of 1.078 mm. The retort design is concluded to be safe to use under sterilization load conditions with a safety factor value of 2.9.

Kata kunci

Jaringan kolaborasi para penulis

35 penulis · 93 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • State University of Semarang
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Nana Kariada Tri MartutiState University of Semarang2
Fulia Aji GustamanAfiliasi tidak diketahui2
Dwi WidjanarkoAfiliasi tidak diketahui2
Wahid Akhsin Budi Nur SidiqState University of Semarang1
Isti HidayahAfiliasi tidak diketahui1
RR. Sri Ratna RahayuAfiliasi tidak diketahui1
Dhita Prasisca MutiatariState University of Semarang1
Satya Budi NugrahaAfiliasi tidak diketahui1
Antari Ayuning ArsiAfiliasi tidak diketahui1
Dadan Budiansyah BudiansyahAfiliasi tidak diketahui1
Bunyamin BunyaminState University of Semarang1
Margunani MargunaniAfiliasi tidak diketahui1
Margareta RahayuningsihAfiliasi tidak diketahui1
Dadan BudiansyahAfiliasi tidak diketahui1
Widi WidayatAfiliasi tidak diketahui1
Fidia FibrianaState University of Semarang1
Nurdian SusilowatiAfiliasi tidak diketahui1
Sunyoto SunyotoAfiliasi tidak diketahui1
Dewi LarasatiAfiliasi tidak diketahui1
Sonika MaulanaAfiliasi tidak diketahui1
Deky Aji SusenoAfiliasi tidak diketahui1
Nanang IndardiAfiliasi tidak diketahui1
Bhramantya Panji SAfiliasi tidak diketahui1
Muhammad Iqbal Pujo SaktiAfiliasi tidak diketahui1
Ahmad ShokibAfiliasi tidak diketahui1
Miftachul HudaAfiliasi tidak diketahui1
Rahmat Doni WidodoAfiliasi tidak diketahui1
Muhammad Gifani Al QadryAfiliasi tidak diketahui1
Wirawan SumbodoAfiliasi tidak diketahui1
Ari Dwi Nur Indriawan MusyonoAfiliasi tidak diketahui1
Rizki SetiadiAfiliasi tidak diketahui1
Arif RahmadhiAfiliasi tidak diketahui1
Wahyu Dwi PangestuAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unnes.ac.id/journals/jim/oai, pertama di-harvest 6 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Design and Validation of Horizontal Steam Retort with Capacity of 100 kg Presto milkfish Using Finite Element Method (FEM)</dc:title>
	<dc:creator xml:lang="en">Nofrizal Fajar Satria Pratama</dc:creator>
	<dc:creator xml:lang="en">Saputro, Danang Dwi</dc:creator>
	<dc:subject xml:lang="en">Retort</dc:subject>
	<dc:subject xml:lang="en">Finite Element Method</dc:subject>
	<dc:subject xml:lang="en">Von-Mises stress</dc:subject>
	<dc:subject xml:lang="en">Safety Factors</dc:subject>
	<dc:subject xml:lang="en">Solidwork</dc:subject>
	<dc:description xml:lang="en">Retorts are used in the food processing industry to sterilize packaged food products. Sterilization of presto milkfish using retort is done at 120℃ and 2 bar pressure. The retort is designed to work safely under these load conditions. This study aims to determine the safety quality of the horizontal steam retort design. Design validation is done by static analysis using finite element method (FEM) with Solidworks software. The retort design uses 18Cr-8Ni type 304 stainless steel material, with a sterilization load of 120℃ temperature, 2 bar pressure, and 100 kg of milkfish load. The analysis showed that the most considerable Von-Mises stress occurred on the torispherical head with a value of . The largest displacement occurs at the torispherical head of the retort door with a value of 1.078 mm. The retort design is concluded to be safe to use under sterilization load conditions with a safety factor value of 2.9.</dc:description>
	<dc:publisher xml:lang="en">Universitas Negeri Semarang</dc:publisher>
	<dc:date>2024-10-25</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unnes.ac.id/journals/jim/article/view/12160</dc:identifier>
	<dc:identifier>10.15294/jim.v6i2.12160</dc:identifier>
	<dc:source xml:lang="en">Jurnal Inovasi Mesin; Vol. 6 No. 2 (2024): OCTOBER 2024; 18-24</dc:source>
	<dc:source>2746-7694</dc:source>
	<dc:source>10.15294/jim.v6i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.unnes.ac.id/journals/jim/article/view/12160/3962</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2025 Jurnal Inovasi Mesin</dc:rights>
</oai_dc:dc>