Melola Discovery

← Melola Discovery

Jurnal

Analisis Aliran Udara Pada Ruang Pengering Low Temperature Dryer Dengan Simulasi CFD

Jurnal Inovasi Mesin · Vol. 3 No. 2 (2021) · hlm. 35–43

DOI
10.15294/jim.v3i2.52798
ISSN
2746-7694
Terbit
2021-10-21
Penerbit
Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Semarang
Bahasa
eng

Abstrak

Food drying technology in maintaining food quality has become an attraction for the food industry. Low temperature drying was the option for drying food while maintaining the nutritional value of food remain intact. The purpose of this study was to determine the air and temperature distribution that occurred in the drying chamber using Computational Fluid Dynamic (CFD) simulations. Geometry of the drying chamber has been done previously in 3D design drawings using software. Various parameters for simulation have been used. The result showed air flowed unevenly in some shelves of drying chamber so that some adjustments were made to the geometry of the drying chamber. After several changes, the geometry of drying chamber could distribute air and heat flow evenly. The air flow into the drying chamber at 2 m/s dropped to 1 m/s upto 1,2 m/s when flow on the drying rack. While the initial air temperature of 50oC was distributed evenly on a drying rack with temperatures ranging from 45oC to 50oC.

Jaringan kolaborasi para penulis

40 penulis · 108 tautan kepenulisan bersama · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • State University of Semarang
  • Muhammadiyah University of Surakarta
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Nana Kariada Tri MartutiState University of Semarang2
Fulia Aji GustamanAfiliasi tidak diketahui2
Dwi WidjanarkoAfiliasi tidak diketahui2
Wahid Akhsin Budi Nur SidiqState University of Semarang1
Isti HidayahAfiliasi tidak diketahui1
RR. Sri Ratna RahayuAfiliasi tidak diketahui1
Dhita Prasisca MutiatariState University of Semarang1
Satya Budi NugrahaAfiliasi tidak diketahui1
Antari Ayuning ArsiAfiliasi tidak diketahui1
Dadan Budiansyah BudiansyahAfiliasi tidak diketahui1
Bunyamin BunyaminAfiliasi tidak diketahui1
Margunani MargunaniAfiliasi tidak diketahui1
Margareta RahayuningsihAfiliasi tidak diketahui1
Dadan BudiansyahAfiliasi tidak diketahui1
Widi WidayatAfiliasi tidak diketahui1
Fidia FibrianaState University of Semarang1
Nurdian SusilowatiAfiliasi tidak diketahui1
Sunyoto SunyotoAfiliasi tidak diketahui1
Dewi LarasatiAfiliasi tidak diketahui1
Sonika MaulanaAfiliasi tidak diketahui1
Deky Aji SusenoAfiliasi tidak diketahui1
Nanang IndardiAfiliasi tidak diketahui1
Syamsul ArifinAfiliasi tidak diketahui1
Nur Hayati MufidaAfiliasi tidak diketahui1
Nofrizal Fajar Satria PratamaAfiliasi tidak diketahui1
Bhramantya Panji SAfiliasi tidak diketahui1
Muhammad Iqbal Pujo SaktiAfiliasi tidak diketahui1
Ahmad ShokibAfiliasi tidak diketahui1
Rahmat Doni WidodoAfiliasi tidak diketahui1
Muhammad Gifani Al QadryAfiliasi tidak diketahui1
Wirawan SumbodoAfiliasi tidak diketahui1
Ari Dwi Nur Indriawan MusyonoAfiliasi tidak diketahui1
Rizki SetiadiAfiliasi tidak diketahui1
Arif RahmadhiAfiliasi tidak diketahui1
Harun Joko PrayitnoMuhammadiyah University of Surakarta1
Sonny ZulhudaAfiliasi tidak diketahui1
Mohamad AliAfiliasi tidak diketahui1
Gamal Abdul Nasir ZakariaAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unnes.ac.id/sju/index.php/jim/oai, pertama di-harvest 6 Nov 2026, terakhir terlihat 6 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Analisis Aliran Udara Pada Ruang Pengering Low Temperature Dryer Dengan Simulasi CFD</dc:title>
	<dc:creator>Huda, Miftachul</dc:creator>
	<dc:creator>Saputro, Danang Dwi</dc:creator>
	<dc:description xml:lang="en-US">Food drying technology in maintaining food quality has become an attraction for the food industry. Low temperature drying was the option for drying food while maintaining the nutritional value of food remain intact. The purpose of this study was to determine the air and temperature distribution that occurred in the drying chamber using Computational Fluid Dynamic (CFD) simulations. Geometry of the drying chamber has been done previously in 3D design drawings using software. Various parameters for simulation have been used. The result showed air flowed unevenly in some shelves of drying chamber so that some adjustments were made to the geometry of the drying chamber. After several changes, the geometry of drying chamber could distribute air and heat flow evenly. The air flow into the drying chamber at 2 m/s dropped to 1 m/s upto 1,2 m/s when flow on the drying rack. While the initial air temperature of 50oC was distributed evenly on a drying rack with temperatures ranging from 45oC to 50oC.</dc:description>
	<dc:publisher xml:lang="en-US">Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Semarang</dc:publisher>
	<dc:date>2021-10-21</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unnes.ac.id/sju/jim/article/view/52798</dc:identifier>
	<dc:identifier>10.15294/jim.v3i2.52798</dc:identifier>
	<dc:source xml:lang="en-US">Jurnal Inovasi Mesin; Vol 3 No 2 (2021): OKTOBER 2021; 35-43</dc:source>
	<dc:source>2746-7694</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.unnes.ac.id/sju/jim/article/view/52798/20574</dc:relation>
</oai_dc:dc>