Melola Discovery

← Melola Discovery

Jurnal

RANCANG BANGUN ALAT PEMOTONG UBI-UBIAN OTOMATIS DENGAN PENDORONG PUTARAN ULIR DAN PEGAS BERTENAGA MOTOR LISTRIK

Jurnal Inovasi Mesin · Vol. 4 No. 1 (2022) · hlm. 1–12

DOI
10.15294/jim.v4i1.64859
ISSN
2746-7694
Terbit
2022-04-22
Penerbit
Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Semarang
Bahasa
eng

Abstrak

Cassava is a food ingredient that has a high carbohydrate content. Cassava farming products are widely available in Klaten Regency. Cassava is used to make raw materials for processed food which are relatively easy to process. However, it is a pity that the processing of these sweet potatoes is still done manually, especially in the process of cutting the sweet potatoes. So we need an innovation that can facilitate the community in the processing of sweet potatoes. Based on the problems faced by cassava chip manufacturers in Klaten, an alternative solution was developed by modifying and automating a semi-automatic cassava chip making machine with a push spring. With the design of this machine, it is hoped that it can help the production of cassava chips because if the cutting is done with a machine, the time needed is shorter and the shape is more consistent.

Jaringan kolaborasi para penulis

35 penulis · 96 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • State University of Semarang
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Rizqi Fitri NaryantoAfiliasi tidak diketahui2
Fiqri Fadillah FahmiAfiliasi tidak diketahui2
Widya Hary CahyatiAfiliasi tidak diketahui1
Natalia Desy PutriningtyasAfiliasi tidak diketahui1
Sucihatiningsih Dian Wisika PrajantiState University of Semarang1
Herlin PujiartiAfiliasi tidak diketahui1
Markus DiantoroAfiliasi tidak diketahui1
Prihatini RetnaningsihAfiliasi tidak diketahui1
Lee Sang WonAfiliasi tidak diketahui1
Raditya Dharma SaputraAfiliasi tidak diketahui1
Rajasa Wido MahendraAfiliasi tidak diketahui1
Dimas TrisnawanAfiliasi tidak diketahui1
Suwandi MarwotoAfiliasi tidak diketahui1
I Wayan Adi WidyarsaAfiliasi tidak diketahui1
Godham Eko SaputroAfiliasi tidak diketahui1
Sunyoto SunyotoAfiliasi tidak diketahui1
Wara Dyah Pita RenggaAfiliasi tidak diketahui1
Irawaty IrawatyAfiliasi tidak diketahui1
Muhammad Yusuf WibowoAfiliasi tidak diketahui1
Andi Abdullah GhyferiAfiliasi tidak diketahui1
Joung Hyoung ChoAfiliasi tidak diketahui1
Widya AryadiAfiliasi tidak diketahui1
Indra Nurul HidayatAfiliasi tidak diketahui1
Karnowo KarnowoAfiliasi tidak diketahui1
Juwita Ria RumondangAfiliasi tidak diketahui1
Fedrik Immanuel RumapeaAfiliasi tidak diketahui1
Ahmad Khusom KurniawanAfiliasi tidak diketahui1
Anwar Widjaya KusumaAfiliasi tidak diketahui1
Fajar Rizqi Sandi PratamaAfiliasi tidak diketahui1
Muklis AminAfiliasi tidak diketahui1
Cho Joung HyungAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unnes.ac.id/sju/index.php/jim/oai, pertama di-harvest 6 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">RANCANG BANGUN ALAT PEMOTONG UBI-UBIAN OTOMATIS DENGAN PENDORONG PUTARAN ULIR DAN PEGAS BERTENAGA MOTOR LISTRIK</dc:title>
	<dc:creator>Fachrezi, Nauval Wildan</dc:creator>
	<dc:creator>Bahatmaka, Aldias</dc:creator>
	<dc:creator>Fajar, Dwi</dc:creator>
	<dc:creator>Shidiq, Muhammad Haris</dc:creator>
	<dc:description xml:lang="en-US">Cassava is a food ingredient that has a high carbohydrate content. Cassava farming products are widely available in Klaten Regency. Cassava is used to make raw materials for processed food which are relatively easy to process. However, it is a pity that the processing of these sweet potatoes is still done manually, especially in the process of cutting the sweet potatoes. So we need an innovation that can facilitate the community in the processing of sweet potatoes. Based on the problems faced by cassava chip manufacturers in Klaten, an alternative solution was developed by modifying and automating a semi-automatic cassava chip making machine with a push spring. With the design of this machine, it is hoped that it can help the production of cassava chips because if the cutting is done with a machine, the time needed is shorter and the shape is more consistent.</dc:description>
	<dc:publisher xml:lang="en-US">Department of Mechanical Engineering, Faculty of Engineering, Universitas Negeri Semarang</dc:publisher>
	<dc:date>2022-04-22</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unnes.ac.id/sju/jim/article/view/64859</dc:identifier>
	<dc:identifier>10.15294/jim.v4i1.64859</dc:identifier>
	<dc:source xml:lang="en-US">Jurnal Inovasi Mesin; Vol 4 No 1 (2022): APRIL 2022; 1-12</dc:source>
	<dc:source>2746-7694</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.unnes.ac.id/sju/jim/article/view/64859/23477</dc:relation>
</oai_dc:dc>