Melola Discovery

← Melola Discovery

Open access Jurnal SINTA 1

Electrical treeing and partial discharge characteristics of silicone rubber filled with nitride and oxide based nanofillers

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 10 No. 2 (2020)

DOI
10.11591/ijece.v10i2.pp1682-1692
ISSN
2088-8708, 2088-8708
Published
2020-04-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-nc/4.0

Abstract

This article presents a study on electrical treeing performances with its associated partial discharge (PD) and the influence of filler concentration in silicone rubber (SiR) samples which are filled with silicon dioxide (SiO2) and silicon nitride (Si3N4) as nanofillers for electrical tree growth suppression. There are many researches on electrical treeing in SiR with SiO2 nanofillers but none of the publication have reported on Si3N4 nanofillers for suppression of the electrical tree growth. In this study, the treeing experiments were conducted by applying a fixed AC voltage of 10 kV and 12 kV at power frequency of 50 Hz on unfilled SiR, SiR/SiO2, and SiR/Si3N4 nanocomposites with different filler concentrations by 1, 3, and 5 weight percentage (wt%) and the electrical treeing parameters were observed with its correlated PD patterns. The outcome from this study found that the SiR/Si3N4 nanocomposites were able to withstand the electrical treeing better than the pure SiR or SiR/SiO2 nanocomposites. Furthermore, the increase in filler concentration improved the electrical tree performances of the nanocomposites. This finding suggests the Si3N4 can be used as filler in polymeric insulating materials for electrical tree inhibition. Meanwhile, the PD activity shows increment when the tree progresses thereby indicating correlation in both parameters which can be as key parameter for monitoring unseen electrical treeing in the opaque samples.

Collaboration network of the authors

21 authors · 67 co-authorship links · 29 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • University of Technology Malaysia
  • Sriwijaya University
  • Sultan Agung Islamic University
  • Universiti Sains Malaysia
  • Universiti Teknologi MARA
  • Universiti Malaysia Sarawak
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Yanuar Zulardiansyah AriefUniversity of Technology Malaysia4
Nehaluddin AhmadUniversity of Technology Malaysia2
Noor Azlinda AhmadUniversity of Technology Malaysia2
Nor Asiah MuhamadUniversiti Sains Malaysia2
Zuraimy AdzisUniversity of Technology Malaysia2
Izzah Hazirah ZakariaUniversity of Technology Malaysia1
N. A. AwangUniversity of Technology Malaysia1
Noor ‘Aliaa AwangAffiliation unknown1
Faris Akmal SuhainiUniversity of Technology Malaysia1
Siti Sufiah Abd WahidUniversiti Teknologi MARA1
Mohd Fikri Hilmi Mohd TaibUniversity of Technology Malaysia1
Mohd Hafiez Izzwan SaadUniversiti Malaysia Sarawak1
M. S. Mohd Fua’adUniversity of Technology Malaysia1
Sri Arttini Dwi PrasetyowatiSultan Agung Islamic University1
Eka Nuryanto BudisusilaSultan Agung Islamic University1
Bhakti Yudho SupraptoSriwijaya University1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Okt 2026, last seen 27 Okt 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Electrical treeing and partial discharge characteristics of silicone rubber filled with nitride and oxide based nanofillers</dc:title><dc:creator>M. Nasib, A. H.</dc:creator><dc:creator>Ahmad, M. H.</dc:creator><dc:creator>Nawawi, Z.</dc:creator><dc:creator>Sidik, M. A. B.</dc:creator><dc:creator>Jambak, M. I.</dc:creator><dc:description>&lt;jats:p&gt;This article presents a study on electrical treeing performances with its associated partial discharge (PD) and the influence of filler concentration in silicone rubber (SiR) samples which are filled with silicon dioxide (SiO2) and silicon nitride (Si3N4) as nanofillers for electrical tree growth suppression. There are many researches on electrical treeing in SiR with SiO2 nanofillers but none of the publication have reported on Si3N4 nanofillers for suppression of the electrical tree growth. In this study, the treeing experiments were conducted by applying a fixed AC voltage of 10 kV and 12 kV at power frequency of 50 Hz on unfilled SiR, SiR/SiO2, and SiR/Si3N4 nanocomposites with different filler concentrations by 1, 3, and 5 weight percentage (wt%) and the electrical treeing parameters were observed with its correlated PD patterns. The outcome from this study found that the SiR/Si3N4 nanocomposites were able to withstand the electrical treeing better than the pure SiR or SiR/SiO2 nanocomposites. Furthermore, the increase in filler concentration improved the electrical tree performances of the nanocomposites. This finding suggests the Si3N4 can be used as filler in polymeric insulating materials for electrical tree inhibition. Meanwhile, the PD activity shows increment when the tree progresses thereby indicating correlation in both parameters which can be as key parameter for monitoring unseen electrical treeing in the opaque samples.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2020-04-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v10i2.pp1682-1692</dc:identifier><dc:identifier>10.11591/ijece.v10i2.pp1682-1692</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 10 No 2 (2020); 1682</dc:source><dc:source>2088-8708</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://ijece.iaescore.com/index.php/IJECE/article/viewFile/14887/pdf</dc:relation><dc:rights>http://creativecommons.org/licenses/by-nc/4.0</dc:rights></oai_dc:dc>