Melola Discovery

← Melola Discovery

Akses terbuka Jurnal Tanpa peringkat SINTA

Analysis of The Effect of The Intake Manifold Curvature Angle of The KZR Engine on The Characteristic of Air Fluid Flow

JMEL : Journal of Mechanical Engineering Learning · Vol. 15 No. 1 (2026) · hlm. 18–22

DOI
10.15294/jmel.v15.i1.31136
ISSN
2252-651X
Terbit
2026-07-12
Penerbit
Universitas Negeri Semarang
Bahasa
eng
Lisensi
creativecommons.org/licenses/by/4.0

Abstrak

This research is to determine the effect of variations in the intake manifold curvature angle on turbulence intensity, turbulent kinetic energy, flow velocity, and fluid flow patterns. One effort to reduce excessive fossil fuel consumption is modifying vehicles to consume fuel more efficiently through a more complete combustion process. One such method involves modifying the intake manifold of a motorized vehicle. This study used FD-based numerical study with a quantitative approach to investigate changes in the curvature angle of the intake manifold. The aim of The modification process of the intake manifold structure was conducted on a 2012 Vario 125 (KZR) motorcycle through simulation. The purpose of this simulation is to conduct a fundamental analysis before implementing changes to the intake manifold structure. The geometric definition of the intake manifold was created using SolidWorks 2020, and the simulation was performed using Ansys Workbench 2022. The curvature angle variations of the intake manifold were 110°, 120° (standard), and 130°. The simulation results showed differences in outcomes for each curvature angle. The highest turbulence intensity, turbulent kinetic energy, and flow velocity were observed at the 110° angle. This indicates that modifying the intake manifold through simulation can influence turbulence flow during the combustion process. These findings can be considered to achieve better torque and power output in vehicles in the future.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 95 tautan kepenulisan bersama · 13 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • State University of Semarang
  • IPB University
  • State University of Malang
  • Daewoo Shipbuilding and Marine Engineering (South Korea)
  • National Yunlin University of Science and Technology
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Niken SubektiState University of Semarang4
Angga SeptiyantoState University of Semarang3
Deni Fajar FitriyanaState University of Semarang3
Fahrur RoziState University of Semarang2
Rifa’atunnisa Rifa’atunnisaState University of Semarang2
Juhadi JuhadiState University of Semarang2
Heru SetyantoState University of Semarang2
Fiqri Fadillah FahmiState University of Semarang2
AbdurrahmanState University of Semarang2
Rizqi Fitri NaryantoState University of Semarang2
Ranu IskandarState University of Semarang2
Kuat NursiamState University of Semarang2
Wirawan SumbodoState University of Semarang2
Muhammad Rizal Agus AdriansyahState University of Semarang2
HadromiState University of Semarang2
Danang Dwi SaputroState University of Semarang1
Deky Aji SusenoState University of Semarang1
Yusuf Sudo HadiIPB University1
Ahmad Naharuddin RamadhanState University of Semarang1
Putri NabilaState University of Semarang1
Samsudin AnisState University of Semarang1
SukarniState University of Malang1
Muhammad Ziddun Ni’amAfiliasi tidak diketahui1
WahyudiAfiliasi tidak diketahui1
Febrian Arif BudimanAfiliasi tidak diketahui1
Alfin Miftakhul HudaState University of Semarang1
Aldias BahatmakaState University of Semarang1
Lee Sang WonDaewoo Shipbuilding and Marine Engineering (South Korea)1
Firdaus AudtiyaState University of Semarang1
Hanif HidayatNational Yunlin University of Science and Technology1
Imam SukocoState University of Semarang1
R. Imanu DanarState University of Semarang1
Faisal Abdul AzizState University of Semarang1
Hanif HidayatState University of Semarang1
Mochammad Miftachul SyanusiState University of Semarang1
HadromiState University of Semarang1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unnes.ac.id/journals/jmel/oai, pertama di-harvest 6 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Analysis of The Effect of The Intake Manifold Curvature Angle of The KZR Engine on The Characteristic of Air Fluid Flow</dc:title>
	<dc:creator xml:lang="en">Fernando, Arga</dc:creator>
	<dc:creator xml:lang="en">Naryanto, Rizqi Fitri</dc:creator>
	<dc:creator xml:lang="en">Roziqin, Ahmad</dc:creator>
	<dc:creator xml:lang="en">Maulana, Sonika</dc:creator>
	<dc:subject xml:lang="en">intake manifold</dc:subject>
	<dc:subject xml:lang="en">ansys fluent</dc:subject>
	<dc:subject xml:lang="en">turbulent intensity</dc:subject>
	<dc:subject xml:lang="en">turbulent kinetic energy</dc:subject>
	<dc:subject xml:lang="en">velocity</dc:subject>
	<dc:description xml:lang="en">This research is to determine the effect of variations in the intake manifold curvature angle on turbulence intensity, turbulent kinetic energy, flow velocity, and fluid flow patterns. One effort to reduce excessive fossil fuel consumption is modifying vehicles to consume fuel more efficiently through a more complete combustion process. One such method involves modifying the intake manifold of a motorized vehicle. This study used FD-based numerical study with a quantitative approach to investigate changes in the curvature angle of the intake manifold. The aim of The modification process of the intake manifold structure was conducted on a 2012 Vario 125 (KZR) motorcycle through simulation. The purpose of this simulation is to conduct a fundamental analysis before implementing changes to the intake manifold structure. The geometric definition of the intake manifold was created using SolidWorks 2020, and the simulation was performed using Ansys Workbench 2022. The curvature angle variations of the intake manifold were 110°, 120° (standard), and 130°. The simulation results showed differences in outcomes for each curvature angle. The highest turbulence intensity, turbulent kinetic energy, and flow velocity were observed at the 110° angle. This indicates that modifying the intake manifold through simulation can influence turbulence flow during the combustion process. These findings can be considered to achieve better torque and power output in vehicles in the future.</dc:description>
	<dc:publisher xml:lang="en">Universitas Negeri Semarang</dc:publisher>
	<dc:date>2026-07-12</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unnes.ac.id/journals/jmel/article/view/31136</dc:identifier>
	<dc:identifier>10.15294/jmel.v15.i1.31136</dc:identifier>
	<dc:source xml:lang="en">JMEL : Journal of Mechanical Engineering Learning; Vol. 15 No. 1 (2026): June; 18-22</dc:source>
	<dc:source>2252-651X</dc:source>
	<dc:source>10.15294/jmel.v15.i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.unnes.ac.id/journals/jmel/article/view/31136/10699</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2026 Arga Fernando, Rizqi Fitri Naryanto, Ahmad Roziqin, Sonika Maulana (Author)</dc:rights>
	<dc:rights xml:lang="en">https://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>